GEN 2 Camera issue in 2017 Raptor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

KDAWG97M3

Member
Joined
Nov 11, 2016
Posts
35
Reaction score
7
Hey guys I have an issue with my 2017 camera front and back. I used forscan to re calibrate, it has gotten worse since the sync upgrade (still sync 3) and funny thing is ford website says I have an update ready but the truck won’t take it. Not sure if my APIM is going bad? Any help or guidance would be appreciated.
 

Attachments

  • 6EC2398B-F2FB-4DBB-BDAF-0F5C4845633E.jpeg
    6EC2398B-F2FB-4DBB-BDAF-0F5C4845633E.jpeg
    236.4 KB · Views: 7

FordTechOne

FRF Addict
Joined
Jul 29, 2019
Posts
6,398
Reaction score
12,499
Location
Detroit
Are you doing the 360 camera alignment procedure? It requires special mats placed in very specific positions to successfully calibrate the system.
 
OP
OP
KDAWG97M3

KDAWG97M3

Member
Joined
Nov 11, 2016
Posts
35
Reaction score
7
Are you doing the 360 camera alignment procedure? It requires special mats placed in very specific positions to successfully calibrate the system. I just hit calibrate on forscan. The camera was doing this prior to me cal
Are you doing the 360 camera alignment procedure? It requires special mats placed in very specific positions to successfully calibrate the system.
It was
doing this prior to me “calibrating” the system. Maybe I made it worse. What is my call to action here? Dealer? Or a way to fix it? I was
going to try and upgrade sync one more
time to see if that fixed anything.
 

FordTechOne

FRF Addict
Joined
Jul 29, 2019
Posts
6,398
Reaction score
12,499
Location
Detroit
It was
doing this prior to me “calibrating” the system. Maybe I made it worse. What is my call to action here? Dealer? Or a way to fix it? I was
going to try and upgrade sync one more
time to see if that fixed anything.
It looks like the camera may be bad, but it really should be diagnosed to verify it’s not a circuit issue. It’s not likely the APIM, as the zoom and check surroundings message are clearly displayed on the screen. You can try to update Sync, but the software updates typically resolve intermittent issues, not a hard fault with the camera image.
 
OP
OP
KDAWG97M3

KDAWG97M3

Member
Joined
Nov 11, 2016
Posts
35
Reaction score
7
I updated sync successfully, camera worked for a bit, then failed again. not sure next steps...
 
OP
OP
KDAWG97M3

KDAWG97M3

Member
Joined
Nov 11, 2016
Posts
35
Reaction score
7
I do. I will pull now...

code B1530 trailer aid camera angle detection

alignment or adjustment incorrect

also to note my TPMS Sensors are throwing a code. I disabled the feature. Outside of that no Other DTC’s
 

Attachments

  • EC3211EF-FE17-4FD6-B91B-B4DD04C5B9D5.jpeg
    EC3211EF-FE17-4FD6-B91B-B4DD04C5B9D5.jpeg
    267.4 KB · Views: 6
Last edited:
Top