BD LP4 Pro installed on a-pillar

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rlj676

Active Member
Joined
Jan 5, 2020
Posts
96
Reaction score
103
Location
Detroit
My issue was with the connection at the aux wire. Highly recommend the aux extension wires from SPV… seems like a lot of money for what it is but makes install so much easier lol.

Ford leaves no wire length to work with even with battery out.
 

MDJAK

FRF Addict
Joined
Feb 23, 2019
Posts
4,444
Reaction score
6,161
Location
NY
As an aside, I attempted to install the BD made side covers today. Hot garbage. Such a poor fit I tossed them in the garbage.
 

MDJAK

FRF Addict
Joined
Feb 23, 2019
Posts
4,444
Reaction score
6,161
Location
NY
Yep. These had 2 holes for the screws on the inner side where light connects to bracket. They won’t go inside, must go out, and are at least 1/4” from light, look bad, and will suck in lots of wind. Too late for pics. Tossed em.
 

22R37

Full Access Member
Joined
Sep 25, 2021
Posts
235
Reaction score
173
Location
staten island NY
Yep. These had 2 holes for the screws on the inner side where light connects to bracket. They won’t go inside, must go out, and are at least 1/4” from light, look bad, and will suck in lots of wind. Too late for pics. Tossed em.
I think those are not BD covers. I saw those somewhere, definitely not BD
 

Attachments

  • F016F179-80F1-450B-9DE9-F0F909D19464.jpeg
    F016F179-80F1-450B-9DE9-F0F909D19464.jpeg
    151.7 KB · Views: 19
Top