Baja Designs Reverse Kits for Gen3 Raptors

[4x4TruckLEDs.com]

So we just wanted to let everybody know that the Baja Designs Reverse Kits that we offer for the Gen2 Raptors, bolt right onto the Gen3 Raptors. We've got these readily available in a few options for you

S2 Bolt on Reverse Kit
https://www.4x4truckleds.com/baja-designs-ford-raptor-2017-s2-reverse-light-kit/


Also available in an S1 Format: https://www.4x4truckleds.com/baja-designs-ford-raptor-2017-s1-reverse-light-kit/


We've also got some flush mount options as well:

S1: https://www.4x4truckleds.com/baja-designs-ford-raptor-2017-s1-flush-mount-reverse-light-kit/
S2: https://www.4x4truckleds.com/baja-designs-ford-raptor-2017-s2-flush-mount-reverse-light-kit/

Of course we also offer a Squadron kit if you want, but most folks go for the S1 and S2 kits.

 

[CUTiger]

@4x4TruckLEDs.com does this harness still use the green wire w/brown stripe @ the tail light as shown in the Gen2 instructions or a different wire? Thanks in advance!

 

[4x4TruckLEDs.com]

@4x4TruckLEDs.com does this harness still use the green wire w/brown stripe @ the tail light as shown in the Gen2 instructions or a different wire? Thanks in advance!

It installs the same as on the Gen2. In fact, even the Broncos have the same reverse tap. Ford kept things pretty standard. The Lightnings ARE different though (we make a completely different kit for Lightnings).

We've also got a plug and play option available that costs a bit more as it uses a trailer Y-adapter to sit in-line with the trailer harness (which is what we do on the Lightnings)

 

[BadWRP]

So we just wanted to let everybody know that the Baja Designs Reverse Kits that we offer for the Gen2 Raptors, bolt right onto the Gen3 Raptors. We've got these readily available in a few options for you

S2 Bolt on Reverse Kit
https://www.4x4truckleds.com/baja-designs-ford-raptor-2017-s2-reverse-light-kit/
View attachment 328493

Also available in an S1 Format: https://www.4x4truckleds.com/baja-designs-ford-raptor-2017-s1-reverse-light-kit/


We've also got some flush mount options as well:

S1: https://www.4x4truckleds.com/baja-designs-ford-raptor-2017-s1-flush-mount-reverse-light-kit/
S2: https://www.4x4truckleds.com/baja-designs-ford-raptor-2017-s2-flush-mount-reverse-light-kit/

Of course we also offer a Squadron kit if you want, but most folks go for the S1 and S2 kits.

Do you have any more pics of the Squadron flush mount install?

 

[smurfslayer]

Just to dogpile here, this is a great mod. I have wide corner squadron sports - not quite as bright as some newer and smaller units but quite respectable light throw in close. I’ve got them tied to reverse on the trailer harness and an up fitter and they’re awesome.

The only issue I’d really correct on my install is I’d go with the S2’s instead of squadrons because it’s easier to drag the squadrons and mess up the aiming.

 

[BadWRP]

Just to dogpile here, this is a great mod. I have wide corner squadron sports - not quite as bright as some newer and smaller units but quite respectable light throw in close. I’ve got them tied to reverse on the trailer harness and an up fitter and they’re awesome.

The only issue I’d really correct on my install is I’d go with the S2’s instead of squadrons because it’s easier to drag the squadrons and mess up the aiming.

Did you also flush mount the squadrons?

 

[smurfslayer]

no, I had the squadron sports up front, upgraded to pros and moved the sports to the rear. I can barely draw a straight line with a ruler, much less cut a straight line. I figured flush mounts would be nice but I’m not that crafty.