Baja Designs Linkable Bumper Light Bar Kit coming SOON.. for the 2024 Raptor Modular Bumper (Pics)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,150
Reaction score
1,078
We do have the new NO DRILL/PLUG N PLAY Brackets and Harnesses ready for preorder on these now. Here are the links-


Complete Kit-

Or Move Over Bracket kit for your existing setup.

A few notes on this. We utilized all 4 bolts for the most stable install. This doesn't allow the bar to rock or vibrate vs just a single L bracket.

We also strategically spaced the bar as close to the grille as possible while also having just barely enough room to tie your wiring in clean back there.

We are giving a special preorder discount to members. So you can reach out to us at info @spvparts.com or send us a PM for a special code.

Let us know if you have any questions.

John
317/934/6778
 

FordPerf Addict

FRF Addict
Joined
Aug 24, 2016
Posts
1,405
Reaction score
557
Spv, I like how oem+ the linkable looks with the bracket. My only concern is with off-roading will the lights bump into the painted surface ? I know the bumper and panels move slightly when off-roading.
I always worry I would be able to get anything back there to clean up that paint!
I wonder if having an extra half inch could help with both of in case those issues
 
OP
OP
Specialtyperformanceparts

Specialtyperformanceparts

Supporting Vendor
Supporting Vendor
Joined
Jul 15, 2017
Posts
1,150
Reaction score
1,078
Spv, I like how oem+ the linkable looks with the bracket. My only concern is with off-roading will the lights bump into the painted surface ? I know the bumper and panels move slightly when off-roading.
I always worry I would be able to get anything back there to clean up that paint!
I wonder if having an extra half inch could help with both of in case those issues

We did leave about an inch or so space behind it. So that won't be an issue. We left enough, but not an excessive amount to accommodate the wiring and the lights from touching.
In addition, the brackets are slotted to the bumper so you can slide them in a little to bow it out, or out to bow the bar inward.

John
 
Top