GEN 1 Back in Stock: Vorsteiner Venom Rex 601

Discussion in 'Ford Raptor Wheels & Tires Forum [GEN 1]' started by [email protected], Apr 17, 2018.

Sponsored By: Texas Motorworx
  1. Nick@Apollo-Optics

    [email protected] Supporting Vendor Supporting Vendor

    Posts:
    5,787
    Likes Received:
    1,971
    Joined:
    Apr 3, 2011
    Location:
    Houston, TX
    Hey guys! We’ve got the VR601s coming back in stock at the end of the month and have 10 sets left: 7 in Carbon Graphite and 3 in Mystic Black.

    We’re launching another pre-order for folks to get their hands on them now as the next shipment won’t be available until June.

    Pricing is $1750 for the set of 4 with free shipping CONUS and includes a full set of lugs.

    If you need some more info on these wheels, the VR601s are the all-new Vorsteiner Flow Forged Wheels exclusively for the Ford Raptor and Ford F-150.

    Fitment is for all F-150/Raptor models from 2009 to 2018; both Gen 1 and Gen 2!

    The Venom Rex 601 is custom spec’d in a 20x9 size with an offset of ET+12 to allow for a more aggressive fitment than stock while keeping then wheel inside the fender.

    The VR-601 is made using Vorsteiner’s Flow Forged technology which allows the wheels to be strong, with a 900kg load capacity, but also to be lightweight. These wheels tip the scales at only 28.5lbs each.

    Standard finishes are Mystic Black and Carbon Graphite. Custom finishes are available.

    Customer deliveries will begin late April or early May.

    Here are some pictures installed with the Carbon Graphite Finish:

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    And here are a few in Mystic Black:

    [​IMG]
    [​IMG]
    [​IMG]

    For more information and to go to our sute, click here: https://tinyurl.com/VR601
     
  2. Nick@Apollo-Optics

    [email protected] Supporting Vendor Supporting Vendor

    Posts:
    5,787
    Likes Received:
    1,971
    Joined:
    Apr 3, 2011
    Location:
    Houston, TX
    Bumping this back up for the late night guys!
     
  3. RDFTS

    RDFTS aka Rick Supporting Member

    Posts:
    12,622
    Likes Received:
    8,815
    Joined:
    Nov 10, 2013
    Location:
    Southwest Missouri
    Are they going to make these in 17"?
     
    Last edited: Apr 17, 2018
  4. Nick@Apollo-Optics

    [email protected] Supporting Vendor Supporting Vendor

    Posts:
    5,787
    Likes Received:
    1,971
    Joined:
    Apr 3, 2011
    Location:
    Houston, TX
    They are! They'll be available at some point later this year.
     
  5. RDFTS

    RDFTS aka Rick Supporting Member

    Posts:
    12,622
    Likes Received:
    8,815
    Joined:
    Nov 10, 2013
    Location:
    Southwest Missouri
    Being smaller would they have a higher load rating capacity than 1984lbs?
    For the heavier GEN1's and all. :)
     
  6. Nick@Apollo-Optics

    [email protected] Supporting Vendor Supporting Vendor

    Posts:
    5,787
    Likes Received:
    1,971
    Joined:
    Apr 3, 2011
    Location:
    Houston, TX
    We'll have to see. Vorsteiner designs the wheels to be as light as possible while staying within factory specs for load rating and GAWR.
     
  7. Nick@Apollo-Optics

    [email protected] Supporting Vendor Supporting Vendor

    Posts:
    5,787
    Likes Received:
    1,971
    Joined:
    Apr 3, 2011
    Location:
    Houston, TX
  8. Nick@Apollo-Optics

    [email protected] Supporting Vendor Supporting Vendor

    Posts:
    5,787
    Likes Received:
    1,971
    Joined:
    Apr 3, 2011
    Location:
    Houston, TX

Share This Page