B&M Diff Cover and Trans Pan

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Daneger

Active Member
Joined
Jun 21, 2024
Posts
51
Reaction score
83
Location
Texas

Bubbasuwannee

Full Access Member
Joined
Jul 9, 2019
Posts
290
Reaction score
522
Location
Angier, NC
I have the transmission pan, but have yet to install it. Been trying to find info as well on others that have used it. The main question I have is does it still clear the OEM skid plate.
 

mleaky

Active Member
Joined
Apr 30, 2024
Posts
53
Reaction score
91
Location
Arizona
Crawl under the truck and measure the depth of the stock pan and skid plate gap. Measure the depth of the new pan and do some math. Report back, I'm sure there are more people wondering how the fit is.
 

Gsteve

FRF Addict
Joined
Dec 11, 2013
Posts
1,753
Reaction score
719
I have the transmission pan, but have yet to install it. Been trying to find info as well on others that have used it. The main question I have is does it still clear the OEM skid plate.
i saw on FB where the seller says it doesnt fit a raptor
 

MikeyP87

Active Member
Joined
Jul 19, 2022
Posts
62
Reaction score
78
Location
Rancho Santa Margarita, CA
For the transmission pan, I don't think the deep sump one is worth it. These transmissions (at least the 10R60 in the Explorer ST) have a thermostat to regulate temperature, and the deeper pans don't make any measurable change in fluid temp.
 

Bubbasuwannee

Full Access Member
Joined
Jul 9, 2019
Posts
290
Reaction score
522
Location
Angier, NC
I did some measurements between the stock pan and the skid plate over the weekend. There's maybe 2" between the rear of the stock pan and 3" on the front. The B&M pan is 2 3/4" tall at the rear and about 4 3/4" in the front compare to the stock pan 2 3/4" front and 2" rear.

I think the B&M pan will fit, but it will be pretty close to the skid plate. Been checking labor only prices... dealer quoted $600 and an independent shop $460. When I had it done on my 2019 labor only was like $150.
 
Top