Aux switches and lighting

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jakedog

Member
Joined
Sep 13, 2018
Posts
15
Reaction score
4
Location
San Diego
I was curious how everyone else has had their wiring done for their fog/driving lights and which if any AUX switches were used.

If I have 3 fog lights (on each side), and 2 are amber and 1 is clear, is it possible to run them each on a separate AUX switch, or does that completely waste the idea of using a wiring harness?

Greatly appreciate the input!
 

802Avalanche

Full Access Member
Joined
Sep 3, 2017
Posts
151
Reaction score
66
Location
Bold North
I used 3 different Aux switches for the different types (distance and light spread pattern, degree of face melting power) of lights in my bumper. I used another for the A pillar lights. Different switches can hold more amps. So I planned accordingly thus eliminating the need for relays in most cases. I also used a 5th Aux switch for the rear ambers in my GJ 3rd brake light and will use the last aux switch for some lights in the rear bumper when I get that done.
 
Top