GEN 2 Anyone use voodoo rack?

[brettmess24]

What bed racks are everyone using?

Anyone use these?
http://www.kbvoodoo.com/shop/premium-bed-rack

I like the ability to still use my Bakflip but not sure this is strong enough to support a tent etc...


Sent from my iPhone using Tapatalk

 

[KB Voodoo Fabrications]

What bed racks are everyone using?

Anyone use these?
http://www.kbvoodoo.com/shop/premium-bed-rack

I like the ability to still use my Bakflip but not sure this is strong enough to support a tent etc...


Sent from my iPhone using Tapatalk

That's our old rack. Check out our new ones here: https://www.max-modular.com/shop-max-modular/

 

[PBR ME]

That's our old rack. Check out our new ones here: https://www.max-modular.com/shop-max-modular/

Do you make this for a Raptor with a Backflip cover?


Sent from my iPhone using Tapatalk

 

[KB Voodoo Fabrications]

Do you make this for a Raptor with a Backflip cover?


Sent from my iPhone using Tapatalk

Yes we do. Our STEEL Max and ALUMAX racks will fit your truck and cover.

Select No Drill Clips as the attachment method.

 

[PBR ME]

Yes we do. Our STEEL Max and ALUMAX racks will fit your truck and cover.

Select No Drill Clips as the attachment method.

What height will clear the back flip so it can be “flipped” open?

Any pictures of this setup?


Sent from my iPhone using Tapatalk

 

[KB Voodoo Fabrications]

What height will clear the back flip so it can be “flipped” open?

Any pictures of this setup?


Sent from my iPhone using Tapatalk

The cover cannot be opened with the rack installed.

Should you need full access to the bed, the rack is easily removable.

 

[Viss17]

I am not one to ever bash a company but after my experience with Chad at KB Voodoo Fabrications this is absolutely necessary. Do not I repeat do not purchase anything from KB VooDoo Fabrications if you want quality or any type of customer service. Chad is horrible to deal with first and foremost. You will not receive any instructions with your rack. Yes, it is mostly self explanatory but if you have any questions don't expect much from Chad other than short degrading responses through email. There is a reason he doesn't offer a phone number on his website. Fitment wasn't as stated even though I emailed him prior to purchase. The rack doesn't fit properly with my MX4 cover and he keeps blaming me with no help. I assure you everything is installed properly but there just isn't enough clearance for my cover to close properly. Worst of all my rack started rusting after 3 weeks of install. Horrible product! Chad says it needs touched up over time. What?! Powder coat needs touched up after 3 weeks. Dude has horrible products and even worse customer service. He is not willing to work with you to make things right which is shocking as a small business owner with so many other options out there. Spend your money elsewhere. Raptor owners contact me if you have any questions.

 

[KB Voodoo Fabrications]

I am not one to ever bash a company but after my experience with Chad at KB Voodoo Fabrications this is absolutely necessary. Do not I repeat do not purchase anything from KB VooDoo Fabrications if you want quality or any type of customer service. Chad is horrible to deal with first and foremost. You will not receive any instructions with your rack. Yes, it is mostly self explanatory but if you have any questions don't expect much from Chad other than short degrading responses through email. There is a reason he doesn't offer a phone number on his website. Fitment wasn't as stated even though I emailed him prior to purchase. The rack doesn't fit properly with my MX4 cover and he keeps blaming me with no help. I assure you everything is installed properly but there just isn't enough clearance for my cover to close properly. Worst of all my rack started rusting after 3 weeks of install. Horrible product! Chad says it needs touched up over time. What?! Powder coat needs touched up after 3 weeks. Dude has horrible products and even worse customer service. He is not willing to work with you to make things right which is shocking as a small business owner with so many other options out there. Spend your money elsewhere. Raptor owners contact me if you have any questions.

If our customer service is so horrible, why do I have THIRTY SEVEN emails back and forth with this customer? We responded day and night, weekdays and weekends.

The installation of the product in question is super simple, I have no explanation as to why he had so much trouble with it, but I tried like hell to help him. We have at least a hundred F-150 owners with the same exact setup and no issues.

http://www.kbvoodoo.com/shop/f150-hi-rise-crossbars-for-use-with-tonneau-covers

The powder coat was damaged during his installation attempts, so it should be touched up. We even refunded part of his money, even though we were not obligated to (there is absolutely nothing wrong with the product).

The reason I took our phone number off the website is because I'm a one man show, and the phone rings off the hook with sales calls all day, and most of the time I don't have time to talk. That said, we are the most responsive company you will ever deal with. We respond to emails usually within 30 minutes, sometimes instantly if I am at the desk.

Raptor owners contact me if you would like further detail.

 

[Viss17]

I'm not mad first off just disappointed that I purchased a product that rusts after 3 weeks of being on my truck. Look at past posts about the powder coating and Voodoo products. I wish I would have before I purchased. I just want others to know what to expect before purchase. I didn't once struggle with install. This thing clearly doesn't fit with my cover. There is not enough clearance. No pictures of past customers could be provided to show me it fits in Chads supposedly 37 emails. Chad from Voodoo can say all he wants about sending emails but this isn't the definition of good customer service. No help and short offensive emails is all you get. Oh and my rack is still rusting. It was not damaged during install and is rusting everywhere. It has rust even in areas that weren't touched or rubbed against each other. Again if you want good customer service and a product that will last a long time and won't rust after 3 weeks I wouldn't recommend Voodoo.

 

[KB Voodoo Fabrications]

I'm not mad first off just disappointed that I purchased a product that rusts after 3 weeks of being on my truck. Look at past posts about the powder coating and Voodoo products. I wish I would have before I purchased. I just want others to know what to expect before purchase. I didn't once struggle with install. This thing clearly doesn't fit with my cover. There is not enough clearance. No pictures of past customers could be provided to show me it fits in Chads supposedly 37 emails. Chad from Voodoo can say all he wants about sending emails but this isn't the definition of good customer service. No help and short offensive emails is all you get. Oh and my rack is still rusting. It was not damaged during install and is rusting everywhere. It has rust even in areas that weren't touched or rubbed against each other. Again if you want good customer service and a product that will last a long time and won't rust after 3 weeks I wouldn't recommend Voodoo.

We will respectfully agree to disagree.

 

[sorry]

Ordered the new model of this URTC. Looks great and functions as stated with a MX4 Tri-Fold Tonneau Cover - can fully flip up the tonneau cover and clear the rack. However, one of the problems I've read about is still present (powdercoat peeling off after a month of minimal use, without mounting or hauling any loads, eventually forming tons of rust all over the rack etc.) Additionally, the rack is definitely not rated *as-is* for any dynamic use, let alone 300 lbs or a RTT. All the screws and connections that hold this rack together came loose within two months of mere road driving and required continual tightening. When taken lightly offroad, the rack damn near came apart. I think this design is close to being completed, but I would definitely wait until it is back up with the next version and peer reviews confirm these issues are addressed. The URTC is no longer available on the website, which might be a sign that I got an experimental run of this, so perhaps the next version is being re-designed. If that is the case, you will definitely want to wait until this one is straightened out before you shell out ~$1500. For reference, the URTC rack with two top bars and two side bars (4 total) was used in my system. Overall, pretty disappointed in this not-so-cheap rack system, especially given the recent reviews of Voodoo's other racks.

 

[sorry]

I also want to add that I had read mixed reviews about their customer service, but the reviews stating their disappointment are starting to hold more water as the response I was given from Voodoo was "powdercoating is not armor and go buy some loctite and semi-gloss paint".