37s installed!

radelow

Active Member
Joined
Oct 18, 2016
Posts
84
Reaction score
92
Got my BFG 37's installed today. I have the RPG Stage IV suspension. I confirmed with them that it will bolt right up no problem except you have to cut/bend the pinch weld in the front (will do that this weekend or next week). Still pretty tight in places when you turn the wheel but on the street it does not hit anything throughout the entire rotation. I offroad a lot so we will see how it goes!!

I went with the C Load 37 BFG's (factory 37 spec tire on the new Raptor). I am not worried about the load factor, there is still plenty of margin I think. Rides much smoother than the stock E rated 35's I had on there.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

heybear

Full Access Member
Joined
Jul 5, 2021
Posts
100
Reaction score
134
Location
bend, or
Looks great. Seriously.

I suspect that you'll get interference off-road.

Please keep us posted.

Again, nice looking truck...
 

radelow

Active Member
Joined
Oct 18, 2016
Posts
84
Reaction score
92
Looks great. Seriously.

I suspect that you'll get interference off-road.

Please keep us posted.

Again, nice looking truck...

Thanks for the nice comments! I am prepared to go to fiberglass if I need to. Hopefully bending the pinch welds etc. will be all I need to do... We shall see! Getting that done this week!
 

CoronaRaptor

FRF Addict
Joined
Dec 17, 2012
Posts
22,442
Reaction score
16,021
Location
CANADA
Thanks for the nice comments! I am prepared to go to fiberglass if I need to. Hopefully bending the pinch welds etc. will be all I need to do... We shall see! Getting that done this week!
Pics of the process. It's easier to remove the headlights to get at some of the clips at the front of the flares so they dont get damaged, but not required.
 

radelow

Active Member
Joined
Oct 18, 2016
Posts
84
Reaction score
92
Pics of the process. It's easier to remove the headlights to get at some of the clips at the front of the flares so they dont get damaged, but not required.

Not sure if I will do it or just have my local shop do it. I am buried with work and kids sports this week and leave for hunting in Mexico next week so need it done fast!!! Will post photos if I end up doing it myself!!
 
Top