GEN 1 2012 raptor won’t start.

[Murlanboy]

When I turn the key I get a long crank and I have to manually turn the key off to start. I have changed all spark plugs, fuel pump works. I even changed fuse 27. No codes come up, what could this be?! Any help greatly appreciated.


Sent from my iPhone using Tapatalk

 

[MTF]

@Murlanboy

Don't depress the gas pedal
Try a battery disconnect, remove ground terminal for 15 minutes.
Try again.

 

[Murlanboy]

@Murlanboy

Don't depress the gas pedal
Try a battery disconnect, remove ground terminal for 15 minutes.
Try again.

I’ve tried that as well.


Sent from my iPhone using Tapatalk

 

[siooss]

Some basic info from Ford Maintenance Manual, for what's worth.

 

[Murlanboy]

Thank you


Sent from my iPhone using Tapatalk

 

[The Car Stereo Company]

how do you start the truck then? im not sure i understand what you are saying. you turn the key but then have to manually turn it off to start?

 

[Murlanboy]

My truck doesn’t start at all, what I meant was the engine will continue to crank until I manually stop it.


Sent from my iPhone using Tapatalk

 

[MTF]

What year is your truck, fuse 27 issues are with 2011-2014
If yours is one of them, then you may have to disassemble the fuse box and take a look at fuse 27 from the bottom.
It could very well be that one or both wires fell off if it was burnt enough.
And you would need the fuse relocation kit Ford made. Or make your own.

 

[Murlanboy]

I’ll have to check that out, also just search for the ford kit?


Sent from my iPhone using Tapatalk

 

[MTF]

Sorry for the late response.

https://www.tascaparts.com/oem-parts/ford-terminal-el3z14293a

Some have ordered the kit from Amazon.