Search results

They went fast...SOLD.

Got a set of 2013 wheels. Complete with LT315/70/17 Duratrac tires, TPMS and center caps. The wheels were purchased from another member, the tires have roughly 5-6k miles and have only been used as a winter set. I dont want to deal with the hassle of shipping. Looking to sell local (Southern...

For those with an unmodified Raptor. I need the height from the bottom of the jounce bumper to the top of the rear block while at rest (normal ride height). Thanks in Advance.

Im not a fan of lift blocks (be it stock or aftermarket). The stock setup isn't that bad. But adding an aftermarket block to the stock block to increase ride height is just idiotic. Talk about a nightmare for axle wrap. Besides, whats custom about that setup?

I had a clunk coming from my passenger front wheel as you had described. I had worked on the front suspension several times before hearing/feeling the clunk. After climbing under the truck more times than I wanted too and racking my brain for a cause, I found that my lower shock bushing had worn...

Town Faire is good. You should also look at Mavis. They have 2 stores in western MA, Pittsfield and Great Barrington.

Its for emissions. And yes it could affect the way the truck runs if it comes loose/off. Screws with the ECU. Id run it by your dealer and let him have a look at it just to be on the safe side. If it looks like it got beat by a rock, I wouldn't count on warranty work. But that also depends on...

Evaporative Canister.

Just removed my Ford Racing Exhaust System and found the mufflers were filled with over a quart of water. I hadn't forded any water deep enough to penetrate the system. So I came to the conclusion that all that water came from condensation during warm-ups and short trips. For those of you...

Sure. I can buy a muffler that looks like this: But what I need is this: But since it is part of a specific system, they won't sell just the individual part. They want you to buy the entire system........ again.

Heres a little Borla info. Need to replace my muffler due to a hole put there by off roading. Called Borla and gave them the muffler assy number that needs replacing and the system number that the muffler fits. The person told me they do not sell individual parts from complete systems. Its...

Someone found another use..... for the Raptor. Suge Knight ... FULL VIDEO of Fatal Hit and Run | TMZ.com

Its the Terrain color. Impervious to damage.

SCAB, 37/38 all around.

Some people don't read the entire initial post. :snoopfacepalm:

Heres an somewhat easy way to check and get a number that is very close to what you're looking for. Jack up one wheel. Put a cloth measuring tape around the center of the tire and make sure its tight. Let the wheel down with the weight of the truck on it. Take up any slack in the measuring tape...

The hell with the road, the earths curvature seems to throw mine off. :ROFLJest:

Naturally the wheels that came with the truck were trained at the factory. Bought a second set of wheels and tires (for winter). Put on the winter set but got no light or message. Tried to train them. Could not train them. So, drove around for 2 mos. without the light or message coming on. Then...

Go to the Wheel and Tire Forum (right below the Suspension Forum) and do some RESEARCH. It should take of all of 20 mins and you'll have your answer.

http://www.fordraptorforum.com/f25/one-only-tire-size-thread-382/ Title says it all as well.

Yes, check your lower shock bolt torque. I did. Many times. Turned out to be the lower shock bushing. Make sure there is little to no movement. Explained here. http://www.fordraptorforum.com/f9/cold-weather-clunking-shocks-38033/index5.html#post832893

Looking at this picture. You need to get that IWE vacuum line secured and quick. Looks like there has been some rubbing already.

Ok... Got off my ass and tore into the lower FOX shock bushing and this is what I found. 2 large aluminum washers/spacers on either side as well as 2 green dust covers. The bushing itself is made up of a large aluminum tube with what looks like thick clear urethane sleeve with dimples bonded to...

Food for thought. This was my case. Had a clunk in pass front area when going over small to medium bumps in the road (heave or frost bumps). Very annoying. I knew there was some issues with the stock FOX shocks making noise, but this wasn't noise coming from the hydraulic motion of the piston...

Found this pic on another site. Its the same number I have on mine. It appears to dampen vibrations in the 8.5Hz range (whatever the hell that is). But I wouldn't worry too much about your cab coming loose (or off). There is still a cab bolt running thru the top half of the mount to the...