Search results

Is this Throttle bumper a bolt on, or does it require cutting/welding to the frame horns?

Met a white SCREW with a shell going north on the Foothills Parkway near Townsend, TN today. Driver flashed lights and we waved.

Saw a white '14 SCREW in Chattanooga today heading north up I-75. Had Washington State tags, KTM window sticker on it and a Roush exhaust. Anyone on here?

Thanks, Joe. Looked back at shooterAMGs issues with the camera......same exact thing is going on with mine. 4 pages of suggestions and seems nothing worked. I'm gonna shoot him a PM and see if he ever got it resolved and how.

Update....... ....well, unhooking the battery didn't make any change to the camera being stuck in zoom mode...

Hey Crystal, I'm at 117K, so waaaay out of warranty. Wanted to roll this issue out to the members here and see if there was something obvious that I was missing. Gonna try the battery disconnect Joker mentioned and see if that works any magic. Yoda

2011 with Sony Nav system. Seems the camera is locked in zoom mode and will not allow me to change the settings to return the view to normal with the proximity guidelines. As is, the guidelines aren't visible. Any ideas?

Got behind a black screw with GA tags on I-40 near Lebanon TN yesterday. Anyone here?

Done

Hello, I'm IN!!!!!

Other than getting some long stick qtips and cleaning out the dirt/dust that collects in the trough the window slides in, should I be putting any lubricant on the control cables? Makes quite the noise when opening and shutting, I can live with it, the wife nearly has a seizure...LOL.

Nashville Sightings...... ......late this afternoon saw this Roush in the parking lot of Bass Pro at Opry Mills. As I was leaving the parking lot a second black screw with topper was pulling in the parking lot. Gave and got a wave. Anybody here?

No, Hoverp, the ones I have were the highest wattage available at that time. Only a couple of vendors had them and both were 22\30 watts if my memory serves me correctly.

Mac, the ones I have are 22w on low, 30w on high beam. I mounted the driver to the outside "wall" just behind the headlights. There was a relatively flat spot and they're holding just fine with 3M industrial Velcro. If they ever loosen, I'll drill a hole and screw them in the same spot...

My son and I saw two headed west on I40 yesterday as we were headed east to the gun club in Chapel Hill. Black crew around Lexington, TN and a Ruby Red LE scab just after we crossed the Tn River on the interstate.

I'm all ears.

Wassy, Try progressive tightening of your wheel lug nuts. Do the star pattern, like you normally would, torque all 6 at 50 ft/lbs, then 75, then 100, 125 and finally 150 ft/lbs. Same pattern, over and over till at 150. It takes a bit longer, but it all but eliminated my vibration with...

You currently running 44 psi?

I've been running the Lifetime LED bulb replacements in my '11 for about 8 months now. No issues so far. Only regret is that the high beam is only slightly brighter than low. Low is far better than the OEM's or Sylvania's (which I'd tried before the LED's). Would I do these...

Boss, I can tell you that you can feel the road and they do "react" somewhat more to rough roads/potholes/pavement wrinkles than the BFG's did, however, I don't feel all that feedback in the steering or have to correct when I hit a bump. Currently running 44 psi up front and 42 in the rear, had...

Happy with mine so far. Have put just under 3k on them and been in the mud and sand a couple of times prepping for hunting season. Seem to hook up and clean out fairly well. A bit more noisy than the stockers on the interstate at 80+, but I just crank up the tunes. Gonna rotate them this...

Greetings, fellow Tennessean.

Just simply outstanding VG. Glad this turned out the way it did.

35" EXO Grapplers...... .......so far, so good. Nothing off road just yet, only got home a bit ago. I can report their highway manners are good, having a bit more hum at interstate speed than Terra Grapplers, but that was expected. Definitely quieter than my worn out BFG's.

I'm thinking that's the reason. I could be wrong. Have you checked the specs on Nittos website?