Search results

Well for mine, I would have had to remove the muffler and also remove the gas tank. Far easier to cut as difficult as it was.

Nice work brother!

As it turns out I am just doing that install as we speak. So far the bolts at the front of the leafs were a pain to cut through. For some reason the drivers side is more difficult. I’m going to have to get better blades for my sawzall. I ran through 5 blades just getting the passenger side cut...

I did not have the seal replaced. I bought some of this: https://www.amazon.com/gp/product/B01IRECH9M/?tag=fordraptorforum-20 I cut some smaller segments and filled the area on the outside of the window seal right where there is a gap from the moulding that comes in off the corner of the...

I would have to agree that Rick has been awesome to deal with. I couldn't recommend him and his business more.

I believe Mercon LV is the current approved T-case fluid for our trucks.

I have the same exact problem. I first thought it was the 3rd brake light as well and I have replaced with several new lights as well as sealing the light off with weatherstripping and butyl rubber. As it turns out the issue is with the rear window seal. My window has never been replaced either.

My experience tells me that the new brake light is not going to help you in the intermediate run. The gasket starts out thicker than the one you are replacing but it eventually gets crushed and looks like the old one with the same results. YMMV.

Thanks I will eyeball that area closely. Seems like a lot of water to be leaking through the screw holes though, cause the rear seat gets absolutely soaked.

Ok, sorry to bring up this zombie thread, but I'm getting super frustrated tracking down an ongoing leak dripping through the rear driver's side headliner in the corner on my Gen 1. After looking through these threads awhile ago I concluded that it was most likely the 3rd brake light causing...

Totally agree on Southwest Alignment. They have aligned my gen 1 many times.

Just ordered. Thanks for supporting the site!

Howdy everyone, I searched the forums but didn't see anything specifically on this. I am curious if anyone has any advice on where I can source a replacement lock cylinder for the driver door handle. Someone tried to punch the lock out (unsuccessfully). I have looked around on eBay etc...

I had something similar happen to me at the end of last year. Came out of a restaurant to find the passenger rear window broken out and my briefcase stolen. They got my computer and iPad plus some other important stuff. The parking lot was well lit and had seemingly lots of traffic. I was...