Search results

  1. Bluu

    Removing grille help for lighting

    Glad they helped! Its a bit frustrating the first time, but not overly difficult once you realize where all of the fasteners are located!
  2. Bluu

    Cobb Intercooler boost question

    I had a lead around my stock BOV when I first installed the Cobb I/C. A little extra grease around the o-ring seemed to fix the issue. I currently see ~19psi (+ or - 1psi) when the boost first kicks in, then around 5,000rpms the boost drops off and ends up around ~14-15psi just before...
  3. Bluu

    Broken axle!!

    In the slow/slippery mode the truck is grossly de-tuned (for traction purposes), and at the rate of speed that you were going it had to have been something else locking up that caused the issue. Does the truck roll freely in neutral? (i.e. there isn't a caliper that is locked up, or a hub...
  4. Bluu

    Windshield wiper (recall)

    Does anyone know if this is for 21's and 22's?
  5. Bluu

    No sound from VTA mod/blow off valve??

    My turbosmart is pretty quiet, with the windows up you are barely hear it at all (with radio on you can't hear it). Are you able to mount a gopro in the area to see if you can 1) hear the VTA, or 2) physically see the BOV cycling? If the BOV was not plugged in it will quickly throw a check...
  6. Bluu

    Truck Stance

    How are you measuing this? From the ground to the bottom of the wheel well? If you're parked on level ground you should have a ~1.75in rake, where the back of the truck sits slightly higher.
  7. Bluu

    Aux switches affect radio signal?

    Example of what is happening
  8. Bluu

    Aux switches affect radio signal?

    So essentially its the same as when you install an amplifier and run the power along one side of the vehicle and the RCA's on the opposite. I'm just curious if its the routing of the factory aux wires that is causing the issue, or if its the routing of the XL80 power that is causing it. If...
  9. Bluu

    Aux switches affect radio signal?

    I noticed this morning that when I turned on my AUX2 switch, which triggers my XL80 A-pillar lights, that the radio station that I was listening to turned to pure static noise! Has anyone else experienced this? Full disclosure, I was in a part of town where there is sometimes some very light...
  10. Bluu

    Nitto Trail Grappler Issue

    The larger the tire, the more likely you will run into something like this. Typically however it's after 10k miles or so when these types of issues occur. Check for excessive wheel weights on your wheels, sometimes a tire will be out of wack and it will cause several ounces of weights to be...
  11. Bluu

    Hi-Lift jack install

    did you end up going with the Loc-Rac mount? Does it rattle a bunch, or does it seem pretty secure? The hook on the one side of the jack looks like its pretty minimalistic and would rattle.
  12. Bluu

    Gen 3 finance rates.

    Crazy what a few months can make in rates. 2.99% for 60 back in March.
  13. Bluu

    Shipping company

    I've used Motoshippers a few times and always had a great experience! 505-917-3349
  14. Bluu

    Exhaust rattle on cold start?

    That was the only one that I found relating to the exhaust for a 2022. There is a heat shield issue noted, but it does not appear to be associated with the rattle. Hopefully somebody has an updated bulletin that i am not seeing.
  15. Bluu

    Exhaust rattle on cold start?

    It looks like Ford doesn't plan on doing anything about it.... "This condition does not affect vehicle durability and no additional diagnosis or service"
  16. Bluu

    Removing grille help for lighting

    I recently made my first purchase with BD, and ran into an issue with my order, but after a short phone call to BD my issue was quickly resolved. Definitely top notch customer service in my opinion, but I understand that not all experiences are the same. Glad that the timing worked out well...
  17. Bluu

    Removing grille help for lighting

    Awesome, glad to hear!
  18. Bluu

    Removing grille help for lighting

    You do have to put a fair amount of pressure on each side to pop the grill loose once all of the bolts are out. I recommend using both hands and popping it loose by one headlight, then repeating the same for the other headlight and not trying to do both side in one pull.
  19. Bluu

    Removing grille help for lighting

    Just the two inner ones, the other two are for the headlights.
  20. Bluu

    Removing grille help for lighting

    The trim piece below the grill is tricky on the ends by the fender flares. I was able to get an extension with a swivel through the flexible piece just below that and above the bumper to get those out. Its an awkward angle, but at least I could see it, versus doing it from the bottom, which was...
  21. Bluu

    Removing grille help for lighting

    Is the top coming loose but not the bottom? There are two bolts just below the inner edge of the headlights that you have to bend the flexible flashing back to get to which you may not have taken out? See the picture with red arrows below.
  22. Bluu

    Baja Designs XL80 A-Pillar Kit Installed

    Got my XL80's installed this past weekend and very pleased with both the look and the light output!
  23. Bluu

    Baja Designs XL80 A-Pillar Kit Installed

    Ordered my kit 3.5 months ago, and the tracking number shows they will finally arrive today! They look good on your truck and should put out a ton of light!
  24. Bluu

    Livernois tune for 2021

    10.5:1 on the Gen 3, not sure on the specific differences in the turbos, just know that it was published in several places that they were different.
Top