Ok, I hope this is the final update. The correct box arrived and I got it installed. It’s been in place 2 weeks with no issues but I have to pass 3 months to say for sure it’s fixed. After replacing the fuse box I pulled apart the old one and found a bunch of corrosion on the PCB. Multiple pins...
OK, 2nd update on the fuse box...The local Ford dealer states the part number they gave me is correct per the supersession info in the parts system. We sent photos showing the differences between the 2 and they are "looking into it" but after 2 days we have not heard back. Does anyone have a...
So I ordered parts by Vin number through my local Ford store. I got after it this morning and removed the fuse box which was a PITA. Upon putting the new fuse box and old one side-by-side, I instantly realized I had the wrong part. The new box does not have nearly as many pins as the old box...
I've confirmed the starter relay is integrated into the junction/fuse box via wiring diagrams. It was on backorder for a bit and has arrived today! I'm installing it this weekend and then I'm going to open it up to see if there is a smoking gun inside. If I don't find anything it will...
Ok, I need to replace front and rear pads and rotors and I’m not looking to go big with a set of Alcons. I’m looking for real world experience with stock replacement aftermarket set ups. I’ve had good results with EBC in the past but that vehicle is an overland rig. is ready…go!
@Rick at FMS I’ve suspected the integrated starter relay in the battery junction box the entire time, and was able to confirm it just yesterday. The issue has only occurred 4 times since January so it’s taken a bit of time. Each time the issue has occurred I have popped the hood and knocked on...
I was recently gifted a set of fab tech upper control arms. They are missing hardware, but appear to be brand new and the story goes that they were on display at some shop that has now gone out of business. Just curious if anyone has experience with these? I don’t see them on fabtech’s website...
Search for waste gate rattle on this forum. There was a write up about putting springs from Lowe’s on them to create tension and stop the rattle. Springs were in stock at my local store and it works like a dream! 5 min install.
As a Service Manager at a High Line store, I can tell you that you need to go straight to the General Manager. Call ahead, make an appointment with him, and present your case face to face. Don't yell, don't call names, just present the obvious and ask to have it made right and you'll likely get...
My rattle ended up being 2 things...1st was the driver sway bar end link. While on the truck there appeared to be no play or wear at all on them and felt solid. I took them both off and found that both sides had no resistance in the joint and felt very loose. I also found the driver-side link...
This situation may be turning around over there... After a bunch of calls and voicemails, a guy named Phil returned my call, apologized for the delay, and explained he came on board to help w/ customer service. He went on to help me source replacement gaskets for the cab and S2 lights. The dude...
The saga continues... My biggest issue is still getting the truck into a failure condition so it can be diagnosed as it goes 4 or 5 weeks between occurrences. I've managed to get my FORSCAN hooked to it twice while the issue is live and (in addition to P06E9) also had P2681 stored for engine...
@OffroadAlliance.com and/or @4x4TruckLEDs.com, do either of you guys have a replacement gasket for the 3rd brake light itself? Also, do you have the gaskets for 3 S2 lamps that fit between the lamps and the GJ housing? Thanks!
I just found this thread today as I’m searching for tips and tricks as I look for a rattle in my left front fender/suspension area this weekend. Their response of too bad so sad it just makes noise is completely unacceptable. I am a service manager at a High-line car dealership and we would...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.