Search results

I would like to see a small displacement TT V8 based on the 2.7 EB. Based on the current 2.7 specs, we could have a V8 around 4.0L with 500 hp/600 tq in a conservative state of tune, V8 sound, and weight and reliability close to or even better than the 3.5 EB. An HO version of the same engine...

Don’t forget to factor in the weight of fuel when calculating payload. It’s about 216 lbs for a full tank.

For any exhaust to be worth it for me on a G3, it would need to be at least 20 lbs lighter than stock with equal or better sound. That’s not happening IMO. Of course, a company like Akrapovič could make a Ti/CF axle-back system and achieve that, but the sales volume and price would make it a...

Make sure that 110 isn’t leaded. If that station is anything like the ones in AZ, there are two race fuels at the same pump and they are easy to mix up. The 110 is leaded (E0) and the 100 (E10) is not. I’ve never seen an unleaded race fuel over 100 octane but it might exist.

I would consider this if it is at least 20 lbs lighter than stock, otherwise probably not worth it since the stock exhaust is so good. Any weight specs?

Pheasant

Yeah, I just drilled a hole through the receiver frame.

https://antigravitybatteries.com/products/starter-batteries/automotive/ag-h7-rs/ Probably not the best option for very cold climates, but I don’t think there is a better battery out there at the moment. Buy once, cry once.

Don’t have the Eibachs yet, but my wife wants to go camping this weekend and I had a couple hours to burn after work today. Figured I could at least try out the bags and see how she tows our Ember TT. I’m guessing the installation instructions from AirLift have you completely remove the...

Good points. Thanks.

I am about to go ahead with Eibach springs F+R and the Airlift 1000 air bags. My only real concern is whether there will be any loss in overall rear suspension travel with the bags in there or damage to the bags at full compression? I need the bags for towing but don’t want to have to...

OK, so I’ll pass. I was hoping you had the black wheels and I doubt you would want to downgrade to a manual tailgate even if they were compatible. Hopefully someone else will respond and you get what you’re looking for.

I’ll get pics as soon as I can. Forgot to mention, my tailgate is also Rhino lined from when I had the bed done. Might be willing to meet in Las Cruces so I can get my truck Goose tuned in the same trip. Are your wheels the black ones, and is your tailgate the same as mine, just minus the...

Is your ‘22 a 37 package with black wheels? If so, I might be willing to trade my Oxford w/appliqué tailgate and gunmetal 37 beadlock wheels for your non-appliqué tailgate and black wheels for no charge. I’d even pay labor. Side notes: My tailgate and wheels are perfect and ceramic coated...

Also, I remember hearing there were some minor changes to the cooling system from Gen2 to Gen3 and overall airflow on the stock Gen3 is better.

I’ve pulled a ~5k pound TT plus 1K of cargo from Phoenix up through the mountains of AZ during the summer with my 2021 37 truck and so far no cooling problems. About the only thing I don’t like, even with a WDH, the squat is a little more than I want, so I’ll soon be installing +1”F/+1.5”R...

Leaf springs?

https://www.motor1.com/news/631682/ford-f-150-raptor-r-spied-getting-facelift/

Also, the Gen 3 uses a new, flat seat spark plug that is supposed to be indexed and I would think revised cylinder heads to accommodate that change.

Came across this video of a Ford tech going through plug replacement procedure on a 2019 truck. At the beginning of the video, he mentions that Ford has changed the spark plugs (and I would assume the heads as well) on 2022+ 3.5 EB engines from a traditional tapered seat plug, to a flat...

Got my check today!

Tony also mentions that Ford intends to be able to make the R less exclusive in the coming years. For what it’s worth….

The Predator engine for Raptor R will be built on a new assembly line in Dearborn. 18:40 in video

https://performanceparts.ford.com/part/M-1021K-BL2

Waiting for COBB and @GooseTuned to get to work on the Gen 3 so we can see how E30 will work.