Search results

I’ve been skimming the posts and haven’t seen much in this. Ideally I’d want to do race series upgrades but nothing available yet. Has anyone done the eibach 1” fronts with the 1.5” rears? Pictures? Trying to get some lift but not negatively affect ride too much. Also looking to keep the...

Anyone have any intel on race series shocks being released specifically for the gen3? I know covid and economy probably play a role in this, but 3-4years in and still nothing? Or are they not able to get any appreciable gains over stock? I know it’s not just Fox, last I saw Icon was getting...

I ordered some Motorcraft prediluted yellow coolant to top of my truck today. Problem is that the truck seems to have a orange colored coolant from the factory in it and the new yellow is a fluorescent yellow in color. Any ideas if that could be an issue using the new stuff to top it off...

Posted in the maintenance forum and didn’t get a response. Is there anything special needed to be done when vacuum bleeding the brakes on these trucks? Or just bleed as normal? Sounds like there’s a brake maintenance mode that might be required for changing the pads?

I didn’t turn up much on here when searching. On a 2022 gen3, do I need to put the truck in brake maintenance mode to vacuum bleed brakes? Or is that only required when replacing pads? Thanks.

Has anyone experienced the parking brake engaging by itself? Happened to me twice this weekend. Both times seemed to happen while in off-road mode under 10mph. Brake engaged and illuminated the dash light. Had to quickly reach down and disengage from the button. Really caught me off guard both...

I have a new, never mounted Builtright Industries Bulkhead Accessory Rail for sale. Fits 2015+ F150 and Raptors. https://builtrightind.com/products/bulkhead-accessory-rail-kit-ford-f-150-raptor-2015?_pos=1&_psq=bulk&_ss=e&_v=1.0 I used the T Slot Nuts from this so you will have to source your...

Wanted to see if others had suggestions for Raptor specific spare parts to carry while off-roading? Not looking to get too crazy but anything common you guys would recommend carrying? Thanks Asking about actual replacement/spare parts, NOT tools, recovery gear, etc.

Selling a set of KC Hilites Flex Era 4 Combo beam pattern lights. They are brand new in box, never mounted or removed from packaging. Box was only opened to take a picture to list for sale. Link below for all tech info. Asking $450 including shipping within continental US...

Posted in the maintenance forum but haven’t gotten any replies. Does anyone have any instructions or insight on changing the cabin filter in these gen3? I know it’s probably similar to gen2 but figured I’d ask.

Does anyone have instructions or insight into changing the cabin filter in a Gen3? Would like to get mine swapped out and appreciate the help. Thanks

I’m sure this goes without saying but be careful of who works on your truck. I always do my own oil changes/tire rotations because I like giving the truck a once over and don’t trust most dealerships. Well… had the first oil change done at 2k miles at Galpin Ford so that it was on record and...

Looking at Camburg UCA for a 37 package truck with stock wheels. They are saying wheel spacers or aftermarket wheels are needed. What’s the backspacing on the stock 37 wheels? Will all billet UCA’s be pretty much the same? Anyone done it with the stock wheels and no spacers?

Found these little parts on 2 separate occasions recently. Found them by where the windshield wipers are mounted at the base of the windshield. Anyone know what they could be?

Just wanted to give a warning to those with the power tailgate and getting aftermarket Bedliner installed. Unlike the Ford factory liner, aftermarket companies (LineX in my case) spray so that it wraps around the back edge of the bed and all the way to the edges of the tailgate. The issue is...

I noticed the seal on my moonroof wasn’t seated correctly and had my dealer look at it when it was in for service. They ordered a replacement seal and I’m waiting to bring it back. The service advisor said they would have to pull the glass to repair. I’m wondering if I should just leave it as is...

Anyone know of a easily accessible grounding location behind the rear seats? Needing to power a Kendwood VHF radio that pulls about 13A. I have the positive run to the battery but would like a ground in the back to use the supplies harness. Tested the bolts mounting the equipment and scissor...

I installed a Spod 4x4 Bantamx in my truck today. I am wanting to use the factory upfitter switches to control my lighting but the low amperage is very limiting. I didn’t want to install individual relays and also wanted options such as strobing and dimming functions. The Spod has 8 input...

Can anyone confirm the correct part number and frequency for the factory TPMS sensors in these Gen 3s? Looking to add a sensor to the spare so I can use it during tire rotations. Thanks.

Anyone have info on this? https://fordauthority.com/2022/04/2021-ford-f-150-raptor-buyers-eligible-for-discount-on-2022-model/

Does anyone have anything official from Ford about honoring the original pricing for existing 2022 orders? Waiting on a truck ordered on the first day order banks opened. Think I read on here that window stickers are showing new, increased pricing. Just wanted to have something in case dealer...

Was hoping to get advice or others experience purchasing a truck from out of state and having it shipped. Dealer is 14 hours away so I’m thinking about having the truck shipped. Don’t like the idea of putting those miles on right out of the gate without a proper break-in period and would like...