Search results

For Sale FORD OEM fold-able bed extender in very good shape and in complete working order. comes with hardware. very easy to install and extremely easy to use. folds out of way when not in use and stays secure in all positions $175 Shipped

Up for sale is a set of retroed headlights. here is the actual build sheet and prices from the builder FX-R Package w/ 3” lens - $720.00 /pair 5Five Ballasts & 5Five 6k HID Bulbs G37-R Shrouds w/ custom aluminum extensions - $35.00 Plug ‘n Play Morimoto H13 Wire Harness Painted Shrouds; OEM SGM...

for sale is a Blue RPG power steering reservoir with aux cooler and aux magnafine performance filter all plumbed together with hoses and 6AN blue fittings and brackets. new the resi cost $350, filter cost $120, cooler, hoses, fittings, and brackets another $100. also comes with a nice decal for...

For Sale are Spyder brand with Phillips LED tail lights. i had them smoked and cleared by an autobody shop. they are fully plug and play with built in resistors as u can see in the pics below. they do have a couple light scratches that may come out with some buffing, i just want to be upfront...

For Sale Rough Country drop shackles. they go from a 1" to 2" drop, great for HD springs and maintaining stock ride height. about a year old. 1-2in Rear Lowering Shackles for 04-13 Ford F-150 Pickup [RC0502] | Rough Country Suspension Systems® SOLD!

For Sale Custom made under seat 2-10" sub box black carpeted with SVT RAPTOR lettering with 2-10" mounted Sundown Audio SD-2 Subs. the box is MDF with fiberglass reinforcement to strengthen and seal box. its in great shape and hits pretty hard. the box pretty spans the width of the rear seat...

For Sale Moroso black catch can with the oem fittings on it making it plug and play. no cutting up your stock hose to take out the OEM fittings and can return to stock easily. Bracket is plastidipped black. uses shock tower bolts to mount it. its an extremely easy install especially with the...

For Sale Injen Cold Air Intake with sock filter cover. in very good shape. it has a partial cover that is only open to the fresh air coming in the front. comes with all needed parts. new this would cost about $335 with the sock $175 shipped

For Sale 4 black method race wheel NV center Caps, like new condition $20 shipped

For Sale used Ford F150 / Raptor Black Splined Lug Nut Kit in great shape, includes all 24 lugnuts and spline tool SOLD

SDHQ Frame kit new, never installed. Sold

i am selling my Traxxas Emaxx 1/10th scale that is modded and has many extra parts. also selling with it is 2 smart chargers and 4 batteries. with the right combination it does 70+ mph. batteries can be set in series to achieve this or they can be set parallel to get max run time the truck...

when ever i first get in the truck and start to drive away slowly i am now getting a squeaking noise. at 1st i thought it was the leaf springs as i have had that issue before on past trucks with aftermarket leafs but i did notice that when i press on the brakes the squeak goes away. its weird...

Check out the link. it has all the info u need on the new tires even retail price. they look to run a little small still and they gained a few pounds(still light) but they made lots of improvements. be sure to watch the video. it looks like they improved the side walls and tread chunking which...

All LED cubes are China lights (Dually knock offs) and are 4-LED flood beam pattern. 2 used cubes with mounting brackets they came with-SOLD i have a total of 4 brand new cubes in box with all brackets and hardware they come with new. SOLD. i took one out of box for pics

I lost my upper hood C clip for the hood assist strut while installing my hood mount lights. i dont know if anyone might have any laying around or know where i can find just the retaining C clip what i am looking for is shown here, the upper fastner

Well looks like the Raptor is going in for warranty work. The sunroof made a weird noise opening and the didn't want to close. I got it closed then tried to tilt it open and it made more weird noises. So I just closed it. I use my sunroof all the time so this sucks. Hoping the can fix it without...

My SCT Livewire TS suction mount kept falling off and the bracket eventually broke. I always hated how my very expensive tuner was held on by a cheap suction mount. I also don't car for the mount for above the radio they sell now. so I looked for a better way and found this. u need the following...

so i have SW long tube headers and high flow cats and a custom tune from Mike@5star. for NYS inspection i need to go to stock to pass because my tune shuts the rear o2's off. when they are off the NYS inspection machine will see these sensor are not "ready" and will fail. i am getting 2 codes, i...

im selling my old exhaust as i went to a full SW setup a while ago. its a custom setup that consist of the oem flange to bolt in at the factory connect location then a straight 3" to a magnapack, out of that with a y-pipe that is 3" to 2 2.5", then has 2-2.5" pipes going out to the factory tips...

thinking of getting a vehicle mounted radio since they are either required or recommended for most runs. my biggest problem is where to mount the antenna. i really dont want a magnet mount and i dont want to drill into my roof either. i would like to do a bed rail mount but i have a bed cover...

So here is something I haven't really seen talked about here. Running WSI HD leaf springs with oem and aftermarket pads or no bump stops since the WSI don't come with the pads. I know the obvious answer is going to be to run an aftermarket bump stop kit, better be safe than sorry, don't be a...

I just installed a new front bumper on my truck and have a few OEM parts I am selling. OEM skid plate NO dents but does have a few scratches and scuffs from offroading. if u wanted to paint it, powder coat it, or even plastidip it, it would look like new. if u go offroad often its perfect...

Has anyone ran a 40" and 30" dual row light bars togethrt on upfitter #1 without changing the fuse size and having any issues? I'm putting a 40" on my new bumper and a 30" behind the grille above the ford logo and I wasn't sure if it would work out. I added up the watts and did the math and its...

Anyone know if we can mount a 30" radius bar in the grille above the FORD logo? Would it fit and mount up? Anyone actually do it yet? Sent from my XT1080 using Tapatalk