Search results

  1. B

    2019 Raptor Boat trailer towing in reverse issue

    Unlikely any issue with either. Trailer must be plugged in or if not plugged in insert the lock out key/pin to prevent the coupler from sliding back and engaging the brakes. If plugged in and the brakes still engage then likely due to excessive angle and you may need to use the lock out key/pin...
  2. B

    (SOLD) 2 ADD HoneyBadger Rear Bumper (SOLD)

    I’m interested, in Tallahassee
  3. B

    GEN 2 Opinions/Input on wiring lights into the high beams.

    My Baja design light bar is wired to my high beams using a relay off the wiring harness to the headlights. Power coming from the battery with inline fuse. The factory headlight acts as a switch to turn on and off the light bar. Take it to a professional and it can be wired to have no impact to...
  4. B

    Eibachs and Icon ride height

    Anyone have their leafs settling like this??
  5. B

    Damn Rough Country light bar, Get what you pay for.

    Yes, I’ve now found one or two post that indicate they had to do that. On mine it’s about 1/2 inch. If the instructions indicated that, then ok you know what your getting. It’s going back and I’ll spend the money for the BD.
  6. B

    Damn Rough Country light bar, Get what you pay for.

    Unless someone tells me I’ve installed something wrong the fitment of the RC light bar is bad. The installation instructions are worse. I’m way old enough to know better to buy cheap and expect anything more than cheap. I should have researched better. Sending the POS back and going with BD...
  7. B

    Eibachs and Icon ride height

    Can someone tell me why with Eibachs up front and Icons at option 2 I don’t have at least 1.5-2” of rake? Pics attached are empty bed, retrax cover and 1/8th tank of gas. Only thing i can think of is pulling my bass boat one weekend caused them to loose 1-1.5”, if that’s the case something is...
  8. B

    Alignment problems after Eibach and icons

    Thank you for the specs, good to know I’m not the only one. Taking it back in tomorrow
  9. B

    Alignment problems after Eibach and icons

    Ford dealership Just installed Eibachs and icons(stock setting) on my 2020 Raptor and did do an alignment. They gave me the sheet with the before and after alignment specs. I immediately noticed the front end would wander side to side causing to have to make constant slight steering adjustments...
  10. B

    Anyone with 295/65/20 tires??

    Seems a 295/65 Nitto Ridge Grappler should run at 35.12 x 11.97 on a 9” wheel. Thinking some would run that with the extra height and with a +12 offset wheel it should keep the tire in a very similar position to the wheel well as stock.
  11. B

    Anyone with 295/65/20 tires??

    Looking at going with 295/65/20, +12 off set wheel, stock suspension. Can’t seem to find anyone running that size, Anyone?
  12. B

    2020 with Eibach Springs and 4” rear blocks ??

    Thank you for all the help, springs it will be
  13. B

    2020 with Eibach Springs and 4” rear blocks ??

    How about the icon leafs? I read where the Deavers rust and make noise
  14. B

    2020 with Eibach Springs and 4” rear blocks ??

    On a 2020 with live suspension Would Eibach springs up front and 4” rear blocks like the ones readyLift has work good? Like to get a little lift, maintain the rake and do not want to mess up the live suspension. If there is a better way to accomplish this to ensure not messing up anything...
Top