Thanks, I will be using an large water to air innercooler as i have the room. The forged rods & pistons i have chosen are of hight quailty and with the right tune & fuel they should live at 20psi for short 1/4 mile passes. The factory block, crankshaft & head deck thickness all looks fairly...
Twin turbos but will run mild to modest boost. Forged 6.300 long 4340 I beam rods and forged small dished pistons 9.0 cr. Will make more Hp than needed at 12psi on pump premium. Guessing about 750 to 850 FWHP @ 6500rpm. Could swith to e85 / tune and turn the boost up to 20psi if the heads will...
Got my first set of cams yesterday from Daniel for my turbo build. He did a great job and after he looked over my heads he decided a single pattern cam would work best with my turbo build. The cams now have .545 lift at valves thats up from .510esh and the duration at 220 @ .050 thats up from...
Thanks MTF, Yes i do know Livernois makes them but honestly booth are fairly simple to designe and with the right equiment they can be made better for alot less $$$. I know these engins where designed for a light truck but i know what works for performance and the basic designe is well suited...
Took the cam phasers apart yesterday to see how they work and they are a fairly straight forward simple desigin and looks like they can be easily limited & controled or locked by making an alum mounting plate that will gutt that inner heavy rotor assy. The stock phasers have a ton of movment...
I recently got 2 6.2 low millage complete pull out core engines to performacne build. I was told one was a good runner and the other was a runner but had a light rod knock. Pulled both engins apart and they booth look to be in very good condition and can not see any reason for a rod, pin or...
I recently got 2 6.2 low millage complete pull out core engines to performacne build. I was told one was a good runner and the other was a runner but had a light rod knock. Pulled both engins apart and they booth look to be in very good condition and can not see any reason for a rod, pin or...
Cody thanks for getting back to me. I just started talking with my cam grinder " Daniel " and he asked me to bring a loaded head so he can check them out before he grinds the cams. Oh I am installing these 6.2 in my personal vintage cars 60 T-bird & 50 Merc woody and plan to do a few others now...
Very kool build Cody. I was told about your build from the turbo forums. I am also building a few personal 6.2 but turbo. I am just starting on cam hunting with only 1 co that has them but there dur is small for my liking and lift is ok. Looking into regrinding the stock cams with a smaller base...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.