Search results

Nice, the BFGs look narrow compared to other brands.

So out of all the under seat enclosures without raising the seat is the best sounding setup you guys recommend?

I'd like to know as well. How to remove the grills and size speakers on the dash of the Unleashed B&O

Nice! I bet it sounds awesome.... I better stop looking.

Still missing my Oxford White Gen 2...

Nice Box! I thought about doing 6 - 6 1/2" rear ported enclosure.

Problem fixed! Loosened both the U bolts and the 2 bolts/pins that hold the leafs. Sprayed WD40 between the leafs then pulled the rear end forward with a ratchet strap. Retorqued the U bolts to 145ftlbs while loaded with the strap then hit the leaf bolts with the impact. There was just the...

Hey guys, I meant off center in the wheel well. Not side to side. It's called Thrust angle because the axle is not square with the frame and will dog track (drive down the road a little sideways) in my case maybe not much. It can be fixed with alignment but with my slight OCD I think a 1/2" off...

I've heard some people having the leaf spring tapping the exhaust.

Hello! Installed the ICON leaf springs on my 20 Raptor and now my steering wheel is off center to the right. I left all bolts loose until the leafs were loaded then I torqued everything. The axle seems to be shifted back on the passenger side. I measured from the tire to the fender and its...

My first choice would be XS Power or Odyssey. I don't think the quality of the standard Motorcraft is there anymore. My Raptor came with a Motorcraft AGM, hope I can get at least 3 years out of it.

Awesome, Thank You!

Good info, will ask my dealer if they've done this before. I need to find some adjustable turnbuckles from the hobby shop! LOL joking, prob. will not work as the new leverage point might cause issues.

Do you have before and after measurements for the rear? I'm also installing the Icons with the +2 Extended Billet RPG Shackles and would like to keep it as close to stock height as possible. Not sure if I will do Stage 1 or 2 on the leafs.

Careful when you adjust the headlights, take your time and do not force it. use a 6mm Hex and not a Phillips screwdriver.

I have a 20 with the same issue. pound on it a little with the palm of your hand and should snap back in place unless there is a clip missing.

I have a 2020 Raptor with the same issue. Re seated the plug behind the camera and has been fine for over a week now. We'll see how long that lasts.