Check both door handles and look for prying on the plastic plate/surround that is under the pull handle.
Common low tech entry method by use of a flathead screw driver (as an alternative to the key fob clone).
The lock cylinder is then attacked.
Door handle will still continue to function...
You can find a lot of threads on FORScan here and other F150 forums. Searching through Google or the forum search should get you what you need.
Also, check out FORScan Tutorial with a lot of helpful links near the bottom of the page.
FORScan 2015-2020 F150s Programming Features is a...
I have a 2019 Raptor with Cobb Tuner BUT a GooseTune and used it after making many Forscan changes without issue (at least 12k+ miles using both, maybe more, I'd have to go back and check my records when I exactly did the install). There were no warnings about Forscan use when I did my tune...
I hate to give you a non-answer but here's what I know:
The stock rims are
Rims
17x8.5 forged aluminum +34 offset (backspacing of is 6.1 slightly aggressive)
So, what type of look are you after? What size tire are you gonna put on that rim?
I use the website F150 Wheel Offset Explained |...
You can try tascaparts for new. Not sure how their prices compare to the local dealer.
The plug and play replacement is #3 on the parts diagram. However, I'd recommend ordering a few extra clips #4 and #5 as they break easily and are the key to get the tight fit of the part on to the...
......And delete the bluetooth connection from the iPhone clearing any connection between the two. Restart device. Try to connect again. Good luck. These things are generally problems with the phone, then cable, then head unit.
I assume you tried to clear the CEL codes with the tuner? Will the tuner do ANY basic functions like read engine stats, boost, etc.? It's a long shot, but try disconnecting your battery for 30 mins to try resetting some of the modules. Any friends with other brand tuners you can try since the...
Did you backup the stock tune before trying to install aftermarket tune? Was the after market tune or stock tune loaded when the IC pipe blew off? If you did back up stock tune, are you receiving the same loading issue trying to reinstall it?
^^^^^ What he said.
However, I happened to have this video at hand: How to fit 37s on a Raptor - Benefits / Drawbacks/ Trimming
The Gen2 was never designed to have 37s and, in my opinion, there is a lot of hacking to do....but you do you.
Good luck.
.....and as always, post pictures!!
Take a look at this attached TSB and see if that helps. It's easy enough to do yourself and if you want to save some costs on the special lubricant Ford specifies, WD-40 sells a RV gasket cleaner and lubricant. A quick search on Amazon will find it or internet search...
I recently went through the rabbit hole you are doing in trying to research current information on using a specific car seat we wanted (x2 with twins). All the information I found fell short and the inflatable seatbelts were an issue that I had not anticipated when I purchased my 2019 Raptor...
They do appear sealed but theses aren't your grampa's headlights :oops:. I was amazed how much was going on inside this $1400-1500 housing when I replaced mine. The wiring harness is huge with multiple plugs and more wires than a headlight deserves, multiple electronic modules attached with...
Have you driven at highway speed's yet? I've had a bed mat fly out of my truck at highway speeds and seeing that this mat doesn't fit very tight, I'm thinking you might have a problem.
My latest option for a bedliner, I went with the DuelLiner thinking that the bed mat locked into the grooves...
Interesting. I drive my truck (only after reaching operating temperature) at almost 100% throttle application every time I put my foot down. Yeah, it's stupid....but stupid fun. I change my oil every 5000 miles. But the oil life monitor calculates close to 10K intervals every time. Perhaps I...
This is what the area under the shifter looks like. There is a lot of room and little to no intrusion into the space between the console and gear selector. Taking apart this area is very easy and all plastic pieces snap fit together. Taking the shifter stalk cover off involves removing two...
Unfortunately, I don't have an answer for you but I am always wondering the same type of things if I were to ever get new tires and rims. You may want to check out https://www.americantrucks.com/f150-wheels-tires-2015.html as they have an area with customer builds and give the specs for each one...
After a comment like that and NO backstory?!?! Was this a country backyard story involving alcohol or were you buying product down in the hood?? Pictures???? Give us something good...
Unfortunately, unless you are a budding DIYer you will need a new one ($1300-1400 with delivery) last time i checked. A used one (i was seeing them for $600-$800), or a used broken one ($ vary greatly) with the plastic glass still intact and you do surgery with a Dremel and replace your working...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.