Search results

Hi all, I have done some testing of my gen 3 in offroad conditions, in Baja mode. Conditions included lots of direction changes, lots of bumps and elevation changes, and plenty of embedded rocks in the surface and on top of it. I locked the diff, and put traction in the level 1 disable...

Thought I would share some ideas for how to wire XL80s on A pillar mounts and an 30" onx6+ bar on the bumper. I had the xl80s on my last truck, but hadn't wired a relay before. I'm obviously not a pro, so please let me know if I should adjust anything or you have other tips for me or others...

I was obviously reluctant to cut into the truck but am happy with the way it turned out. I wanted this to sit back from the bumper, as I'm not a fan of the look where its sticks out in front. This required trimming of the two pieces of the grill (the front piece and the larger back piece that...

Hi folks, just got a 2022 gen 3, after having my 2019 stolen. I am looking into preventing against modern theft, and plan to install some kind of kill switch or alternatively, a switch that is required in order to start the truck (i.e. looking into options recommended by @FordTechOne). I also...

Selling take offs from my 2019 crew cab. Everything came off the truck in Sept 2020, with just under 20,000 kms (12,500mi). I'm in Vancouver, BC, Canada, so shipping may be prohibitive. Rear leafs - free!Stock UCAs - also free! Fox OEM live valve coilovers and rear shocks - make me an offer -...

Anyone use these? How do they hold up, relative to adjustable UCAs and lockout LCA solution, such as those offered by Foutz, KHC, etc?

On my gen 2, I had SVC bump stops installed and they kept the truck safe and controlled on bottom outs. I see there are a few less options out there for the gen 3. RPG and Foutz offer bump stops. I don't see any posts on here about folks installing bump stops. Can anyone weigh in on whether...

Hi folks, anyone have any solutions for protecting the rear live valve sensors on the Gen 3? I'll be getting one to replace my Gen 2, and was looking at the location of these plastic parts and thinking they are definitely at risk of getting taken out by road debris when offroad. The rear...

Hi all, just wanted to share that my truck was stolen last night from my driveway. They disabled the modem, so Ford Pass can't work. Truck has lots of modifications, in case you see it out and about. Please call police if you do. Or call me 778-838-9898. Thanks Ryan Baja Designs XL80 on...

Please forgive/correct me if I get this wrong, but I believe that on my 2019 Gen 2, the live valve sensors are only on the front (attached to the a/arms and frame), which feeds data to the computer which in turn sends current to the front coilovers and rear shocks. No current is full stiff on...

Just had a service at 21000 km and learned that my rear pads are at 2mm but fronts are at 8mm. I am curious if anyone has experienced this type of wear on the rear of their trucks. I use mine for a quite of lot of offroad in Baja mode and am wondering if the brakes are wearing because of...

For offroading a stock width Gen 2 raptor (i.e. 13" front suspension travel), what is the best ratio of compression to droop travel on the front, and why? I have installed Fox Factory Series 3.0s, and with 3/4" of preload (about 1.5" lift), the truck is clunking on extension on potholes and...

Hi guys, thought I would share this with you in case (like me) you have been struggling to figure out a solution to store tools in the bed without drilling into the bed. Its a very simple design really. 1x10 cut to about 9.5" to fit between wheel wells and end of box. This keeps the whole...

Hi everyone, I'm looking for some ideas to help protect the rear shocks on my 2019. I recently purchased some Factory Race 3.0 Live Valves that I have installed, and they are taking a beating. The fox supplied upper zap strap is gone and the lower boot zap strap also got destroyed after just...