Search results

Negative. SYNC 1 has that that you displayed, and the SYNC “with my Ford touch” and are both running the same version of the software. Sync 2 was brought in for 2012 for touch screen models with the new UI.

I’m also interested in how brutal the ride is gonna be with the Live Valve defaulted to full stiffness.

I would not recommend this. Minimum inflation pressure these are rated for is 35psi cold I believe.

Southwest Missouri :(

Looking for a factory catalytic converter/y pipe section from a 6.2 raptor. Thanks!

This. It uses the ABS system to apply brake pressure on the “free spinning” wheel to force power to the other wheel, and visa versa. Much faster, and more “versatile” than a LSD as far as slippery pavement is concerned. That said, I would occasionally get a little bit of one wheel fire on my 1st...

Don't know if this will make you feel better or worse but the front 18" or so of the frame is meant to bend away in an accident, and is welded in such a way as to be replaceable without affecting the structural integrity of the rest of the frame... that said if anything behind that weld is bent...

If anyone goes to headers, or has some laying around, I’m looking for a set of factory cats with the y-pipe/collector from a 6.2.

Thanks for all the well wishes guys... I’ll be back, no doubt. No way I could go forever without another Raptor. Maybe I’ll go orange next time

I’ve been a bit on the busy side yes lol. Moving, losing a job, and now my truck! Cut me some slack!! Lolol

Prius haha. no I sold it outright.. hard times due to losing my job cause of the ‘Rona meant I had to lose the payment I got 15k for it.

Well. Sold my raptor today. 2010 6.2 w/221k on the clock. Hopefully someday I can get back into one, but it’s bye for now gents

Don’t see it being said so I could be the only one, but I put my feet behind the bumper on the frame horns and stand up in there and lean over the engine. Made it pretty easy to reach the back plug wells

Could also be a misfire by the sounds of it

checking back in on this. after 3 months, and almost 10k miles, the ATX's are getting louder, but nothing too crazy. Probably akin to a Ridge Grappler noise wise, louder than the Ko2's but quieter than a MT. The FX4 is due up for tires soon, so i will probably put the generals on the FX4, and...

Been chasing this stupid code for 6 months. New Canister Purge Valve, New Canister Vent solenoid, and i can't find any bad spots in the wiring. code is intermittent, probably only presents 20% of the time below 50 degrees, and 60% of the time above 50 degrees. Primary symptom is the inability...

passed 217K on mine this morning. New slip yoke, upper control arms, and shocks are next up. Only issue i'm really having is trying to chase down a misfire, even after new plugs, wires, and coils.

Likewise... also thought about ordering them from Tasca even though they’re higher, my theory is that maybe they’d be newer and haven’t been sitting on the shelf as long. I’ve heard storing these things is hard on the seals as the oil isn’t flowing.

The biggest issue isn’t even the above posters info, it’s the fact that the live valve shocks with no input from the electronics, default to full stiffness to prevent damage to the shock, and the truck in the case that they lose communication with the ECM. Until someone finds out a way to use...

Around 15k on them. They’re actually not on the raptor right now they’re on my FX4 but came off the raptor when I bought it.

No cracks on the sidewalls just cracks between the tread.

They’re right at 6 years old, typical BFG tread cracks, should I be concerned or ride them out until the tread/shoulders start to show signs of cracking?

You have a real jewel there! Very rare!

got smashed between a clapped out rice burner and a 2' tall curb a couple hours ago. no visible damage other than a really awesome amount of curb rash on my tires, but the front end is clunking over bumps and when turning full lock. i swear i have the worst luck.

Tascaparts.com has seat foam and covers available. Just be sure to check the description to ensure it’s the raptor ones not the fx4/lariat covers/foam. That dent in your seat is where the foam will have a hole in it (mine did the same thing) while you’re at it, if you get the upholstery for a...