Search results

@Nex I have the rear stock replacement bolt in 3.0 Kings (piggy back bypasses)

I will look into that tonight once I have some free time. I'm really hoping the lights weren't duds. @Baja Designs have any pointers for me as well?

Here's what the switch looked like when I got the lights. It's the correct switch but the side is broken and only go's from on-off now. So new switch is required but I want to hook the switch up to see if the lights work @DMays

@Space Ghost the lights have just over 15amps so I don't think the 15amp switch on the upfitter will work

No I wired them to the switch the BD harness comes with but the switch is broken and was seperate from the harness when I recieved them. This is not the harness used for upfitters/spod etc. I tried a couple ways on the switch but nothing turned on. Wondering if anyone else has used this...

So I purchased a pair of used amber LP9 pro driving beam pattern. The lights came with the switch harness (harness 640172) After running the harness how I wanted, I plugged the lights in and went to plug the switch in to find it was broken. But I was also unsure of what wires go to what prong...

I have a pair of rear king shocks for my '19 raptor that I got used and would like to rebuild them. I had a local shop source out a rebuild list but some parts did not seem right so here I am reaching out to the community to see if someone on here knows the rebuild parts list (part numbers as...

Hey Ryan, I will keep my eyes peeled for it around my area. It definitely sticks out and hopefully it gets found I'd be finding all receipts for your parts and hopefully ICBC does not try to pull a shirt over your head.

I like the idea of this kit and probably get it in the near future. I have icon leafs on my gen 2 set in option 2 and know they should work with this kit but wonder if there is something I may be missing. Of course deaver +4 would be ideal but don't want to have to purchase new leafs for this kit

Hey @amREADY I did reuse the stock bolts and have not had an issue with them at all.

So the other day my 14 month old bully dog chewed part of the upper seat cover and was wondering if anyone knows of a good source for a replacement. I contacted my local ford dealer to find out they can get then but for a hefty 3k price (I live in canada) for just the upper part. I am going to...

Correct, loosened the 2 leaf c clamps and removed the bolt. Slid 1-2 average thickness washes between the clamps to help keep a slight gap. Tightened back up and has seemed to get rid of the clunking.

Well I've basically resolved mine clunking. I added washers between the leaf clamps and noticed a change right away. One to two small washer on between each side of the clamps and ta da. Hope this works for you guys.

From what I can see also is the retainer clamps are what are causing the clanking/clunking perhaps. Icon said the pry them outwards because they aren't replaceable. But it's a bit of a pain. Going to use a small bottle torch to heat them up and try to pry apart. Wish me luck. @Qcfx2 @under_psi...

In the same boat for 8 months with them. The squeaking doesn't bother me since it's a leaf thing that you can't get away from. The clunking is what gets me since I don't know where it's coming from and only the pass. Side leaf pack does that. Drivers side mid leaf is slipping out of place now...

Yeah I have a feeling they upped the sensitivity on certain sensors from 18 to the 19 and 20s. Hahaha I bet there will be a McCracken coming your directions. If I were to tune it then I would keep it since the more air coming in will be needed but yeah I will be putting it back to stock. The sb...

Yeah I know it was the install of the intake. Drove for about 50km and **** there's the light. Runs and drives normal still but yeah going to switch it back to stock. And try to sell it since it's no good to me and don't plan on tuning my truck. Yeah I know the exhaust won't do it too. Thanks...

So I installed an sb intake and awe 2fg and now CEL comes on. Has anyone had this same issue with this combo or similar combos. Had the 2fg on for a bit now and had that intake sitting around So installed it yesterday. I get the ford app stating "an improper connection/installation of the...

Was curious to know if anyone is running discount codes or sales on the AWE 2FG exhaust rightnow? Or If anyone is selling there 2FG kit at all. All info is appreciated

The gf and I took our raptors in for a service and to get my toyo mt's put on mine. It's a good day!

@CoronaRaptor I will definitely post the repairs I do for this situation. Looking at a local offroad shop to fab me up some sliders. But yeah the bolts that hold the oem running board on are janky bolts Like @MDJAK Mentioned. I feel like my gf and I aren't the only ones with this problem on our...

@CoronaRaptor Yeah the bolts sheared right through the mount on the cab where the running board mount mounts to. My gf has the same issue on her raptor as well. Both were flukes and was surprised myself when I took a look later on. But yeah im thinking some backing plates of sorts and perhaps...

Most of the time it's dust and debris getting between the leafs in the pack. The little round isolators at the tips of each leaf are the cause most of the time. Give them a good wash down with a pressure washer and spray a good type of lubricant all over the leafs including the bushings. It's a...

That's a good deal! Almost makes me want to pull the trigger lol