I've noticed that if I just give a quick glance to my mirror, especially during a bright day, or when driving at night and there's a lot of additional traffic around, that it's hard to immediately tell that my BLIS LED is on. It's not that it's broken, or that it doesn't work as well as it used...
My dealership has finally (9 months after I brought it in for the 21B10 PCM reprogram and it didn't fix the problem) gotten me scheduled to have the cam phasers replaced under 21N03 next week. I've heard that's going to require the body to be separated from the frame. Is that true? If so, how do...
Anyone happen to have a link for a good set of instructions (or even better, a video) for installing the Morimoto XB headlights on a Gen2 Raptor?
I've searched the forum with no luck, and done a bunch of Google searches and I found a few videos of installation instructions for F-150s, but I'm...
I am interested in purchasing an ESP for my truck, which is still covered by the 3/36 factory warranty (but will be expiring at the end of December when my 3 years is up), and I have a few questions:
If I buy the ESP now, my plan is to add the 'First Day Rental' option. I actually need to have...
Had an emergency stopping situation the other day when traffic came to a sudden stop, and I have to admit that I feel less than excited about the amount of time/distance that it took the truck to stop. I felt like the ABS was kicking in a bit too much, but couldn't do any sort of pedal...
I'm working on wiring up my ditch lights, and I have the lights mounted, and the @Specialtyperformanceparts wiring harness goes from one of the upfitter switch wires, up near the hood hinge on the passenger side, and then I have it routed through the cowl over to the other side. So far so good...
I'm looking at buying a set of Baja Designs Squadron Sports, and would like to at least try to deter thieves (not that anything is "theft proof"). I see that there are a couple options that BD sells, specifically the S2/Squadron security bolts and the 3/8 Tamperproof security nuts. Anyone have...
Has anyone ever mounted Diode Dynamics SSC2 flush mounts lights in the rear bumper? Can you post pics of them, if so?
https://www.diodedynamics.com/stage-series-2-sae-dot-white-sport-flush-mount-led-pod-pair.html
I recently upgraded my front stock bumper to an aftermarket bumper, and no longer have a use for my Offroad Alliance triple bezel light bracket and light guards. The triple mount bracket was on the truck for about 3 months, and is in basically brand new condiiton. The mounting hardware (2 screws...
BFG AT KO2
315/70/17
Load Range C
~20,000 miles on them
These are the stock/OEM tires from my 2019 Ford Raptor. One has 9/32" left (50% of the tire life), and the other has 7/32" left (33% of the tire life). Very even tread wear across the width of the tires. Tires were rotated every 5000...
I'm going to be buying a new set of tires for my 2019 SCREW, and Michelin/BFG/Discount Tire is going to give me credit back on 3 of the 5 OEM BFG KO2s because they wore quicker than expected at just under 25000 miles. I was doing a 5 tire rotation every 5000 miles, and alignments every 6000...
I’m not sure if this is the correct forum for this or not, but I was wondering if anyone has ever installed any 12V outlets (similar to this) in the bed of the truck. I’m wanting to install a couple (maybe 1 on each side of the bed) near the tailgate, but I just thought about it tonight and...
I’m in the middle of doing the BajaMod ACC relocation bracket install on my 2019, and I’ve run into a problem. My ACC module seems to be smaller than the bracket. The description for the relocation bracket says “Now compatible with the newer 2019 & 2020 Raptor Modules”, so I would have expected...
I was parked yesterday and somebody ended up scraping the entire driver's side of her Honda Civic/Accord across my front bumper as she tried to back out of a parking lot. From what I can tell, she ended up doing the following damage to the truck:
Scraped the plastic ends of the 'Trim Panel'...
Just noticed a bit of water dripping from my muffler. I’ve never seen it before, but the weather has gotten cooler in the past couple days. I know the water itself is probably just condensation, and I’m not concerned about that, but looking at it the water must be coming from inside the muffler...
I went to cycle my moonroof open/closed last night, even though it was in the high 30s out, because I do it every so often in order to keep the seals from sticking. I raised it first, and it opened just fine. Then I closed it. Then I pressed the button to have it slide open to the back, and I...
Just thought of something as I was about to download a new tune to the truck...before I made any Forscan changes a while ago, I originally backed up the stock data. This may be a dumb question, but does changing the tune affect any of the data that Forscan has access to? For example, say I make...
I just purchased a tuner and 3 tunes from MPT. I'm not exactly sure which 3 tunes I should select, though. I normally run 91 octane (it's definitely most readily available here), so I'm going to get the 91 PR-X tune for sure, and I'm also going to get the Performance Tow tune because I do tow...
A friend and I recently installed Eibach front springs on each of our trucks, both 2019s. He just came over to have me take a look at some rubbing he noticed on his truck, and after looking on mine, I see it too. Is this normal? I'm not sure what would cause it (I mean, I understand that the...
I recently replaced my front and rear springs (with 14,000 miles on them, about 13950 of which was highway driving, and the rest just dirt roads, and NO four wheeling), and now I have the stock parts (springs, rear leaf block, etc) laying around taking up space in the garage. Anyone ever sell...
I've read all kinds of threads on forums here, read through info from manufacturers, talked to vendors, etc, and I just keep finding conflicting information. After you replace the rear stock springs with either Deavers or ICONs, do you need to a bump pad so that the bump stop does not just...
Just installed Eibach front springs and ICON rear springs (option 2) in the rear. I'm loving the setup, but haven't put many miles on it yet, as I need to get an alignment done. I drove down to a local shop earlier today, and they said they'd be able to do the alignment later this afternoon...
I'm going to be installing the ICON RXT rear leaf spring kit (thanks for the great service @NEOGARAGE!). I will either be going with Option 2 or Option 3 along with a 1" drop shackle, so I expect to gain somewhere between 1-2" of lift (depending on which option I choose, and how much weight I...
All,
I've done a bit of searching, and found this post from @sixshooter_45 which has the torque settings for removing the shocks. Here are a few related questions:
Am I correct in reading 30Lb-Ft for the top bolts, and 406 Lb-Ft for the bottom bolt? I'm pretty sure the 406 is correct, but...
Anyone have a picture of what black lug nuts look like on these stock wheels? Also, could you post the part number of what lug nuts you ordered? Thanks!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.