Search results

From all I've read about APR, they will probably make it right. Seem to be a great company. Good Luck and post your outcome please.

When you've seen a sub drop out of a down firing enclosure, was it due to the MDF failing where the screw went in? Would bolting the subs in (self-locking nuts and washers on the inside to spread the load) solve the issue?

@The Car Stereo Company Thanks for taking the time to give me some advise, very much appreciated. Your speaker selections are way out of my league, but will consider a DSP at a later date if I'm not satisfied with the sound. Leaning towards Polk MM 6502 components for front, DB 652 for rear...

Yes, don't want to spend a ton, but already have all 3 amps. Just need to buy speakers and build a box. (and get the PAC AP4-FD31 interface)

So 120w x 4 will overpower 700W at the sub? That's why I was thinking of bridging the XR-4S amp to send 300W x 2 to the front stage. Use the PDX-5 amp bridged for the rear 150W x 2. 600-700W to the subs from the XR-1S amp.

His thread inspired me to tackle this project! Just trying to figure out if using all 3 of my amps would be worth it.

Would I be better off just getting the Kicker Key 2004 and 5001 amps?

I have a Alpine PDX-5, Kenwood Exelon XR-4S and a Kenwood XR-1S collecting dust in the garage. I was thinking about replacing the B&O in my 2018 SCREW with a better setup. Plans are to build a dual 10" down firing underseat enclosure and run it off the XR-1S. Was wonderimg if I could use the...

Ordered Autotech unit on 17Feb24, arrived today 26FEB24. 9 days from China to Alabama.

My 18 has a panel on front side of the tailgate (bunch of Torq bolts) to access the internal tailgate components. Spray in bedliner will make getting bolts out a PIA due to bedliner in the torq bolt heads.

Had this happen on my 2018 (not power up/down) after washing out the bed and leaving the tailgate down for hours. I guess water accumulated in the tailgate and corroded the latch release actuator. I removed inner access panel of the tailgate, removed actuator, cleaned and lubricated...

That is impressive.

Starlink, bro.

ebay is where I got mine. did the same thing. Swap your electronics module on the new(used) one, as your truck won't recognize to module in the new unit.

https://www.fordraptorforum.com/threads/tesla-style-android-radios-14-5-inch-screens-octacore-qhd-and-fhd-and-128gb.95623/

Wondering if he's getting a replacement as well? Also would like to know if the display can be dimmed very low for night driving. I like my interior lights at the lowest setting possible when driving at night.

No regrets, only downside is the tire noise on rough roads (unavoidable with wide tires). 21 C8 HTC 3LT Z51

This is how I solved this issue: Short version: I increased the brightness of the dash when the headlights are on. Long version: I like to have my dash lights at the dimmest possible setting when driving at night and headlights are on. With my tinted windshield my headlights would come on...

Brackets are arriving tomorrow, planning to install over the holidays.

Settings, Door Unlock, All Doors https://www.wheelsjoint.com/how-to-turn-enable-or-disable-auto-locks-on-ford-f-150/

@auto.x.perts ? perts or parts?

Bedrug would be my choice. Much easier on the knees.

Cancelled my order, it's been over a year since I placed the pre-order.

Ordered 20 January 2021, last email said November 2021 release, almost out of patience.

Ordered 20Jan21, Order still in place, they refunded the dongle for me as well. Email from them (this morning) said that they would be releasing the units in November (due to chip shortage).