Search results

Fellow Gen 2 Pilots, I installed Soundskins Pro in the doors, on the back wall, and parts of the floor of my truck and it's MUCH quieter in there now when the radio is off and I'm on the highway. The problem is now I seem to notice that when I: 1) Have cruise control set to any speed 75 mph...

I installed Icon leafs w RPG track bars, but have a problem with the leaf retaining clamp in front conflicting with the RPG track bars. The underside of the clamp is pinned and I’m unable to remove it. What I need to do is grind off that head to remove the clamp and turn the pieces of the clamp...

I have Icon Leaf Springs with the Add-A-Leaf and Camburg 6" Length Drop Shackles Installed, but want to reduce the rake more. A$$ end still sits up too high, and my Fox Factory 3.0 coilovers are already cranked up 3 full turns, so can't go higher up front(according to Fox). Anyone gone to a...

I have a pair of slim 6" Rigid SR-series Pro bars I removed from behind my grille that I'm wanting to mount on the side of my truck, for when I'm out at the ranch. I have the side mirror spots and switches, and want to see if I could tap 1 Rigid bar into each side switch(pictured), so they turn...

I find it funny that so much attention is given to 0-60mph times on pickup trucks.......which are the least equipped (design-wise) to be quick with hardly any weight over the rear axle...

Man, I just installed my @morimotolighting head & taillights, and damn, they are bright! Just the running lights alone are remarkably brighter than what I had on there before due to the supply chain issues.......major difference.

I have my OEM Gen 2 headlights for sale that have been covered with PPF since Day 1. Upgraded to Morimotos recently, so $1,000 and they are yours. PPF has been removed, so they look like brand new! I also have a pair of Rigid fog light kit brackets for $100, or I can throw them in if you buy...

I just got my setup installed mid-last week and was wondering what your top of fenderwell was sitting at and if you adjusted it up higher any after installing? I added the FFR rears with Icon leafs on Option 2(+2.25"), with Camburg Extended Shackles(-1") to offset them a little. The rear is...

Over the last few months, I've had a strange occurrence happen 3x on me, and I can't figure out what is going on. I'm wondering if anyone else has had this same issue???? I've got 94k miles on my truck, but it runs like a dream(for the most part), especially after adding my COBB tuner(from...

OK, so I took my truck in for AC issues a couple weeks ago to the dealership. Sometimes it blew cold, conditioned air, sometimes it blew warm, humid, unconditioned air. The tech checked it out and found the refrigerant was low so they recharged it, and could no longer find an issue with the...

So, I had the cam phasers replacement done in October 2021, and Ford covered it in full under warranty. Last week, I took my truck in to the dealership again because AC was not kicking on all the time and it was also making an awful rattle on startup. View and listen to attached video. Sounds...

I'm doing a complete redo on my Suspension, and in the process of getting all the parts together to do install at once. So far I have the following: FRONT - Fox 3.0 Factory Race Series C/O's - RPG Steering Tie Rods REAR - Fox 3.0 Factory Race External Bypass (Backorder) - RPG O-R Adjustable...

I installed a Morimoto thermostat in my truck two weeks ago, in preparation for adding a Cobb programmer soon. However, this morning after about 500 miles of driving, I had the CEL come on. Has anyone else had this issue? And if so, any advice?

My Gen 2('18) is approaching 70k miles on it, and looking forward a couple years with the way supply is looking and the ridiculous ADM's out there on new and used Raptors, I have definitely ruled out buying a Raptor R at 25k-100k over the $109k MSRP, and to begin with, I'm still not sold on the...

I’ve got 61,000 miles on my truck today and front right wheel bearings need to be replaced already. I jacked up each side by LCA’s and could wiggle the wheel & tire about 1/4” side to side. Lug nuts were still torqued down. Anyone else had to replace them so soon?

I’ve got 61,000 miles on my truck and front right wheel bearings need to be replaced already. Anyone else had to replace them so soon?

So, I bought my truck in November 2018 with the MBRP Street Series dual in/dual out full exhaust with resonators. Well today, I started noticing my exhaust was annoyingly louder in the cab. Crawled under there, and sure enough one of the 3" pipes pulled out of one of the rear muffler...

The other day, my horn had one of the 2 horns go out and now it’s this wimpy, ***** sounding little horn……need to replace it. Not looking to go full-on train horn, but would like to see what bolder sounding horn others have replaced OEM with……not looking to add compressor, etc….

Does anyone know the part #'s for the bolt and sheet metal retainer nut that goes in the hole in the center of the picture below? I lost it on a rock out in Moab last year, and this darn plate rattles when I'm off-road over 20 mph. Drives me nuts. The head of the bolt on the passenger side says...

I'm in need of replacing my UCA's and trying to determine which is best bang for the buck. - I've seen the ones from RPG, Camburg, Rogue, etc. Rogue are relatively "inexpensive" at $799 when compared to the others out there at $1500+, but at what expense? - Don't want to have to service in...

OK, so I just went to install my new bullet antenna mount on my truck, and I discover that the Black plastic shroud/bezel that covers the base is MIA. It was likely from my last visit to the car wash that caused it to get wiped up or blown up the antenna......WTF! Anyone know how to get a hold...

Just yesterday, after recently going through the trouble of smoking my tail lights a couple weeks ago, I went and did a very minor jump without realizing that my tailgate was down:favorites68:......(Guess I had hit the tailgate release button on the fob without knowing it). So when I landed, the...

Alright, I’ve said it before, my opinion is that the upfitter switches on the Gen 1 are much more noticeable than on my Gen 2. It annoys me that they’re not in a more direct forward view when you’re driving and faintly lit. My problem arises because I turn my rear facing Rigid floods on when I...

All, My previous truck was a lifted Nissan Titan that ran like a Banshee on a Bully Dog Triple Dog tuner for many years with no issue. In the 10 years I owned it, it was only in the shop 3 times for very minor fixes. 2 of the items were worn out sensor cables. That was it. So now with the...

All, I have the BLIS taillights on my truck, but I don't like the darn White rings around the tails or on the headlights. I'm not worried about the headlights right now, because I'm planning to change to Morimoto 2nd Gen HL's soon. BUT, since I have the BLIS tails and they have so many...