Search results

@Mountain Man Any idea what the Part Number of that wiring harness is? is it easy to replace DIY?

Need some help with an intermittent misfiring problem. 2019 with 66,121 miles. 100% stock powertrain. Code: P0025 - B Camshaft Position Timing - Over-Retarded (Bank 2) Code: P0300 - Random Misfire Detected Code: P0304 - Cylinder 4 Misfire Detected Code: P0305 - Cylinder 5 Misfire Detected...

I don’t know. I got those PNs from an invoice done in my truck in Oct 2023.

For a Gen 2 Raptor: Make sure you get the latest revision of the cam phasers, they have the "CD" marking at the end of the part number. "A" is the faulty one. HL3Z-6256-CD Sprocket - CAM HL3Z-6C525-CD - CAM

Anyone have the OEM part numbers for the 4 skid plate bolts and clip nuts towards the front of the skid plate? These are the ones that you need a 13mm socket to remove. Not to be confused with the two bolts/nuts towards the rear of the skid plate that need a 15mm socket to remove. HB4 and...

This is how much I’d rather not drill into the bed or buy a whole bed rack system. @JDS….make these spacer blocks look pretty to improve your plate design. 3D print them to fit nicely with the grooves of the bed floor. Good ol’ blocks of 2x4 for now.

Can anyone post pics of how they secure a Pro Eagle 2-ton Beast Jack in the the bed of their truck? I have this JDS mount but not a big fan of it since it's only mounted in 2 points and it rattles really badly while off-roading. I know JDS has a new design that mounts it in the bed towards the...

Yeah here’s the post of what happened. Root cause was faulty Variable Camshaft Timing (VCT) Solenoid. https://www.fordraptorforum.com/threads/any-help-with-these-codes.61576/post-1599660

Update #3: So after replacing the alternator and the battery, these symptoms and Diagnostic Troubleshooting Code (DTCs) returned... Auto Start/Stop wouldn't work and dash in the Trip/Fuel menu would just say "Engine On due to Vehicle Charging" even though the battery should have been fully...

Engine off: Battery read 12.7V Engine On (auxiliaries and accessories off):13.2V Both taken at the battery terminals. Idle voltage too low? I would have thought 14.2V would be the minimum for a good alternator.

Haven't removed the skid plate to check the alternator connections. Do you know if that can be done from above? If the alternator checks out clean then i fear it could be a harness/wire issue between the alternator, battery, battery monitoring sensor, Body Control Module (BCM), or Powertrain...

Thanks for response. When the auto start/stop and infotainment symptoms began i thought the same thing, so i replaced the 3 year old battery (now regretting that) . Those symptoms remained and the other two symptoms began. So i have a new battery with voltage between 14-16 V while driving. I...

Anyone solve a problem similar to this? Dash alert "Charging System Service Now" Red Battery icon turns on Infotainment (Sync 3) will shut off and say "System Off to Save battery....Please turn ignition off or start engine" Dash alert "Front Camera Temporarily Not Available" Engine Auto...

Update 9,000 miles after repair: all good, no more problems. Truck drives perfect.

You’re right they’re not on Method’s website. I found the 25mm option on Discount Tire Co.‘s website. They’re not stocked and are telling me a 45 day lead time. I’ll keep you posted to see if Method backs out of the order. Unfortunately I don’t see Discount Tire Co. list the 704s. I’d give...

I have stock beadlock capable forged rims and stock tires. There’s evidence of rubbing in the rear, and less severe scrapes on the front. I ordered some Method 703s with a +25mm offset. It’s really hard to find aftermarket wheels that have the stock fit (17”x8.5”; 34mm offset). 25mm is the...

Ordered some Method 703s with a +25mm offset. It’s really hard to find aftermarket wheels that have the stock fit (17”x8.5”; 34mm offset). 25mm is the closest I found. Therefore it’s a 9mm outboard shift. I don’t understand why aftermarket wheel mfrs don’t start with factory sizes. Reducing...

Cycling VCT IAW SSM didn’t work, Dealer replaced Left Hand Intake camshaft solenoid (Bank 2 Sensor A). We’ll see if it’s the true fix. LH valve cover had to be removed, otherwise not sure how you’d access the solenoid screws. I’ll report back after a few thousand miles.

Cycling the VCT 10x IAW the SSM didn’t resolve issue. Truck is back at the dealer for further troubleshooting.

Similar issues.... 2019 Raptor, 34k miles, all stock, always 91 octane gas w detergents, Full synthetic oil at 5k intervals. Intermittent symptoms: 1) rough idle 2) hesitant acceleration 3) abnormal shifting. No Check Engine Light OBD outputs: P0018 - crankshaft-to-camshaft position; Bank 2...

I have the same issues. 2019 Raptor, 34k miles, all stock, always 91 octane gas w detergents, Full synthetic oil at 5k intervals. Intermittent symptoms: 1) rough idle 2) hesitant acceleration 3) abnormal shifting. No CEL. OBD outputs: P0018 - crankshaft-to-camshaft position; Bank 2 Sensor...

For those of you looking to stick w OEM, I found it hard to find PNs for a 2019 with the electronic e brake. Here’s what I used. PNs came from a local dealer: KL3Z-2001-A Front Pads JL3Z-2C026-D Rear Rotor Assembly JL3Z-1125-B Front Rotor Assembly KL3Z-2200-A Rear Pads

I had the same issue of rear fading early, good to know why. I found it really hard to find OEM replacement PNs for the 2019/20 with electronic e-brake. Here’s what I used in case you’re interested. Info came from local dealer KL3Z-2001-A Front Pads JL3Z-2C026-D Rear Rotor Assembly...

You’re right. I don’t work in the automotive industry. Most people don’t and have to rely on the shared sources such as this. No need to be condescending to concerned and frustrated Ford customers. Since you work in the auto industry and have credentials in the field, what’s the internal...

There are plenty of YouTube videos describing very similar cam phaser symptoms occurring on the Triton engines. There are also videos of non-Raptor 3.5L EcoBoost engines exhibiting the same cold start rattle. That history suggests some something systemic, as these are not issues observed in...