Search results

Can't make this weekend but I'm down for any future trips in the socal area area. Live in Redondo Beach so anybody near me let me know if you guys wanna make shorter day trips

Thats odd regarding the set up or lack thereof for the rear shocks. I have put a deposit on the rears and plan on installing them some time next month. If anybody has set them up please share.

sorry, not on IG

If you choose to adjust the shocks here are descriptions of how the adjusters work. The orange knobs that face down are the compression adjusters. The black knobs are the rebound adjusters. All adjustments are done starting at fully closed which is all the way clockwise. On the compression...

Ag Surfer, I will do that. Out of curiosity what area r u in?

Thats the cool thing about adjustable shocks. You can experiment with the settings for various conditions

No they are not " tuned" by SVC, or at least mine weren't. That would require adjusting the internal rebound and compression circuits. Am sure they are capable if desired. However the hi and low speed compression adjustments were set by SVC according to the FOX Racing recommendations. The...

I had the FOX 3.0 coilers installed on my 2018 Screw by SVC a little over a week ago. Before anybody gets all excited about why only driven on road, just calm down. I will test them in the dirt as time permits. Initially I was going to go with the SVC spacers to level the front end ( I love...

you guys are awesome! I think I will follow JPV's lead and mount in the cabin under the right rear pax seat using the Bajamod mounting plate. Will let you guys know how it turns out. Not expecting any problems thanks to all the info you guys provided

Ride height is adjust by first measuring how high the truck sits stock by picking a reference point like sticking a piece of masking tape on the fender before installing the new coilovers. You will want to measure after the new coilovers are in so you know where you’re at. Most professional...

for the basic settings call Fox racing. They will send you and email with very basic settings which show you where the high and low speed compression knobs are as well as the high and low speed rebound for the rear. But thats about it. They said they are working on a more comprehensive guide

Yup, I believe Mspeed is right regarding the relays built into the control circuit of the compressor. I went online and found the company (Bajamod)that makes a simple looking aluminum tray that mounts in the cab under the right rear pax seat next to the inverter. They also provide a simple...

copy, makes sense. Thx!

wow, thats a lot of great info. Appreciate it!

Ok, just to be clear, can I install a 30/40 amp relay to the power circuit from the compressor to the up fitter 15 amp lead and then connect the black lead to ground and call it a day? excuse my ignorance, just wanted to be clear

Has anybody installed an ARB twin compressor using the up fitter switches? It appears the amp draw is to high. Called ARB and they said the 15amp switch should be ok. They suggested a mount kit with a harness that allows you to plug/connect into the factory up fitter wiring (found on suspension...

Tell me about it!

Hi everyone, just recently took delivery of my Screw 2018 Raptor. Purchased out of state (due to the dealer markup ripoffs) and had it shipped to SoCal. I was really excited then with 88 miles on the odometer I got a check engine indication and noticed coolant dripping from the skid plate. Did...