Search results

Here’s a great price on Radio set up if anyone is thinking of buying one...

After you make your final cuts you can use a plumber propane torch to carefully burn out some of the foam in the cavity’s that is close to the area you will be welding. It is highly flammable so don’t get carried away. Then use 3m cleaning disc to do final welding prep. After your done welding...

My plastic block looked a little different. It was held in with a plastic rivet and came off real easy. I used a 3m paint removal disc part number 07476 to remove expandable foam and paint to prep for welding. Yes the aluminum is very strong and hard to cut. There are cut off wheels designed...

Shipped out 1st batch of 6 mounts today. Will be making more mid January, let me know via PM if your interested in one.

My mount is going to include Rugged’s universal dash mount. I have to modify them to work with my mount. It will make it a more turnkey install for everyone.

I have the 1st batch heading to powder coat on Monday. Send me a pm and I’ll give you pricing.

I have a install sceduled for next week. Wanted to verify everything before I started selling them. If I dont have to make any changes then they will go to powder coater and the 1st batch will be ready to ship.

I just completed 3 mounts but they are spoken for. I’ll be able to make more in a couple weeks. I’ll let you know when they are available.

Just sent you a pm

With my 37” KO2’s before I did the inner wheel house modification the left front tire rubbed on the inner plastic liner slightly while driving around town. Any amount of off road driving I think you would definitely cause damage to tire and or truck if you didn’t do this type of modification. If...

Yes I can but it would be early November before I can have them ready. I know I offered earlier to have them available if anybody else wanted them. I didn't make the templates for adapter or cutouts during my original install. So I need to take mine apart and won't be able to do that until late...

I have no rubbing on the rear, see my photos above.

I think the front fenders you would be good especially if your were lifting the front more and with UCA's. The rear fenders you may have to do a similar modification to the lower front and rear bedside flair. I was prepared to do this but after testing my wheel tire choice I determined I had...

0 rubbing, not quite stock height in the front, 1.5" collars.

I'm not a expert in go fast suspension but I do have a lot of experience stuffing large items into small places. Years of building Jeeps, large tires small wheel wells. Here's my latest build that includes some new (to the Jeep world) shock technology. I also never intended my original...

Yes I have, both high speed and lower speed technical stuff. I'm pretty sure I didn't have my wheels turned when landing LOL. But plenty of clearance at full bump in both high and low speeds. I don't have any photos but will take some next time out. PS Cool Photo

My wheels are not 0 offset they have a 6mm offset. Approximately 1/4" narrower than a 0 Offset wheel.

If I were you I would use the wire you have, Im sure it will work fine.

It only hurts a little

I can make more adapters and supply templates of the cutouts if forum members want them. Would only work with this model Rugged Radio

Bullet Proof Diesle https://www.bulletproofdiesel.com/ford-raptor-2017-third-brake-light-antenna-mount-p/90201129_raptor.htm This one is kinda cool too if you want to incorporate rear facing lights...

I used 1/8" , that was about as thick as the panels you will be welding to.

ER5554 is recommended by Ford for repairs to F150

Side note while I had everything apart I routed 1 usb cable to the rear portion of the little tray next to the cup holders. So when I have my phone connected the cable isn't dangling on top of everything. The other usb cable is routed to the dash upper center tray. I use that for when I have my...

I was originally going to french this remote speaker into dash upper tray so it would sit flush with rear portion of tray just below center speaker but I ran out of time. So for now I used the include mounting bracket and surface mounted it to the tray. I can remove the speaker and bracket...