Search results

I am currently in Colorado on vacation with my 18 raptor. coming thru the mountains the front diff started pissing fluid out the driver side all under the truck. I stopped got some 75w 85 and topped it off it was fine for a while then coming back from glenwood it happened again. (in 2wd) can...

the car seat i posted above uses the latch system to mount

theres no way... After doing a ton of research on the infant car seat I ended up buying a britax bsafe infant car seat. (should have just done more research becuase i then had to "upgrade " once the kid hit 22 lbs, and now \shes in this...

yes the bed bolts and retaining nuts on the frame rail are 1 time use

Rinse it off, always be careful with pressure washer especially around the edges but more so just don't get right up on it. Stay 24" plus away Sent from my Pixel XL using Tapatalk

what the op said. No coatings on it for 30 days. If a bird shits on it get it off asap, other than that 30 days in normal.

I have a very similar sound on mine, if i have a cross wind coming from the right side of the truck I get a flutter that I would say sounds like what your explaining. Ive been chasing it since the truck was new, significantly worse in the winter

I have same issue, took the dash apart, tried to find it with no luck, chalked it up to expansion and contraction

Yes Needs programming, alignment, and probably camera calibrations

This is what we are seeing by us in Illinois, all those sensor need to be aligned to factory spec, factory spec is stock ride height stock tires. Allot of alignment shops dont have the tools to do the calibrations and the shops and some of the dealerships that do wont do it becuase of the...

I went down to the fuse panel aswell with an adda fuse @ the kick panel for my dash cam

92 lx and 07 trailblazer ss

its 3 parts hl3z 17d957 aaptm hl3z 17c755 bptm hl3z 17c754 bptm

this is what i did to match the hood and interior

Still for sale? Sent from my Pixel XL using Tapatalk

Thanks very much, spent alot of time on it, wasnt just mask some stripes and clear it. Spent my time to block and clear under the stripes.

I did it myself, So just time and some materials

Thanks Sent from my Pixel XL using Tapatalk

A little dirty but you get the idea Sent from my Pixel XL using Tapatalk

Lead foot, slightly biased but imo leadfoot, orange + black is the way to go

fronts are plastic, you would be hard pressed to find something that would stick to the plastic with out peeling down the road

I have expel on all my vehicles, love it, regardless of the make its a protective sacrificial wrap, it can always be redone

Im averaging 17.6 on 42psi & 93

there is 24 retainer clips holding it on. take the inside access panel off, there will be to nuts under that and then access as many of clips as you can from the back side with a pair of needle nose pliers, just enough to get the applique to lift up. Once its lifted up you should be able to...

I used this for my dash cam install https://www.amazon.com/gp/product/B01ND0SRZW/?tag=fordraptorforum-20 Wanted it on a switched source, dont remember which fuse i used, but looking at the fuse block in the truck it was second from the bottom right.