Search results

Correct. By default the upfitter switched are not connect to the engine bay but wired there. You could connect the switch to the engine bay then to the compressor, or pull the wire into the cab behind the glove box for a single connection.

It’s holding up well. After dragging the frame over many obstacles it has shifted a little, and one of the steel bars has a crack in it from the stress. It’s been this way for a few years now and I’ve been meaning to fix it. It it’s still very secure and I haven’t been crawling much so no...

Thanks for the info. I've been using my repaired moonroof very sparingly but so far so good. My issue occurred on a Gen1 which requires the entire track removed so you can slide the mechanism out the back. Your videos are for a Gen2 which looks like they added a removable part on the track to...

Has anyone come across a company that manufactures armor to protect the fenders and bedside panels on a GEN 1? I slid into a tree while on a snowy trail and put a nice dent in the bedside panel above the rear right wheel. Local shop wants $1,500 to repair it but I have a feeling it will happen...

For anyone interested, here's my $0.02. I have a 2012 SCREW on 35" DuraTracs and I am a member of an 4x4 recovery organization in Colorado. I use my vehicle for high altitude off-road vehicle recovery and SAR. A few times I have found myself in snow 2'+ but I am always with a team of at least...

***Possible Solution*** I recently encountered a similar issue on my 2012 SCREW. While some reported incidents vary slightly, my particular incident consisted of my rear driver side door not unlocking. I could hear the actuator although the door simply would not unlock. I attempted to...

Power was pretty simple. This is specific to the ARB Twin so any other model do your homework. All black wires went to ground. The two heavy red wires went straight to the positive terminal of the battery. I did not use the switch that it came with. Instead I wired the thin green wire to...

That's strange. Images were shared publicly from Google Drive. It was working for me when I tested from a different location and not logged into Google. I've moved the external image references to a different host. Let me know if you still cannot see the images. Thanks, Eric

I've been meaning to install onboard air on my 2012 SCREW and finally got around to it. What held me back was finding a mounting option that did not require welding or taking apart the entire truck. My original plan was to mount directly to the frame rail, however, I didn't want to drill 4...

I've moved the struts to mid perch and it raised the front about 1.5". Just had an alignment done last week. Should have waited. Now have to get re-aligned again. At this point I'll wait a while before making any bumper changes. To spend another $1,800 on new bumper now just sounds...

Thanks for all the feedback guys. I was able to get the moonroof closed by removing the glass, removing the two broken pieces, positioning the mechanism back into the track properly and reinstalling the glass. I can pop the moonroof up and down, just not slide back more than a few inches. If...

Side picks Here's how it looks from the side. Measures 10" from the grill.

Hey Stanley, Did you replace your bumper yet? If not I was looking to replace it with an ADD Venom Winch bumper. The HoneyBadger runs about $2200 and the Venom Winch runs about $1700. If you had the Venom, I would be willing to do an even swap and also help you install. PM me if you're...

Looks like this has been a common problem. Something snapped when opening my moonroof and now it won't close. It gets to about the point it tilts up but then binds then opens all the way again. From what I've seen, the cheap plastic mechanism which connects the moonroof to the track commonly...

Has anyone had any experience with the powertrain warranty offered by Stage 3 Motorsports. It's meant to supplement the 5Star tune for 2Y/24K, 5/60 or 6/100. I purchased my truck at 50K and the factory warranty is expired. I have been considering purchasing an extended warranty and came...

Sold!

I'm considering selling my ADD HoneyBadger winch front bumper. There's nothing wrong with it and it's only been on the car for about 2 months. The reason I am considering replacing it is because it protrudes out in front of the truck quite a bit more than I had anticipated and increases my...

Selling my OEM front bumper and skid plate. Both in excellent condition. Asking $300.

Hi guys, New member to this forum, but been using it a lot for research. I'm considering replacing my ADD HoneyBadger Winch bumper with an ADD Venom Winch bumper. If anyone in the Denver area is looking for a HoneyBadger or selling a Venom, let me know. Thanks, Eric

ADD Honey Badger Hey Hammer, I put an ADD Honey Badger bumper with a SmittyBilt X2O Comp winch on the front of my 2014 Raptor. It's a high quality bumper that works well, but I can't get past how far it sticks out in front of the truck. It extends my overall truck length by about 8" and it...