Search results

  1. stitch702

    GJ Motorsports 3rd Brake Light Wiring

    Actually, I got it working! Thanks for the responses! Turned out to be a loose ground
  2. stitch702

    GJ Motorsports 3rd Brake Light Wiring

    Here is where I spliced the yellow and blue wire together with a splice connector then taped it to ensure it wouldn’t come loose. After reading the instructions from gj’s basic harness, am I supposed to save the yellow wire for future use and just connect the blue wire to the upfitter switxh?
  3. stitch702

    GJ Motorsports 3rd Brake Light Wiring

    So here are the pictures from my install. Just want to make sure I have everything right. So the one the plugs into the middle s2 light had the extra red wire with connector that goes into the white wire coming from the harness that plugs into the stock Cargo harness correct? Now the yellow and...
  4. stitch702

    GJ Motorsports 3rd Brake Light Wiring

    Nope I’m a new guy. Ordered from GJ motorsports. Installations seems pretty straight forward. I posted on here since I figured I would get a faster reply before the sun went down. It’s still early and I will post pics and double check my connections. Thanks for all the quick replies! Much...
  5. stitch702

    GJ Motorsports 3rd Brake Light Wiring

    No, none of the Baja lights come on, but I will recheck my connections and snap a screen shot of my wiring when day light come in. Thanks.
  6. stitch702

    GJ Motorsports 3rd Brake Light Wiring

    Thanks I will check my grounds again in the morning. So not even the center S2 will come on if I have a bad ground with the black wire? Correct?
  7. stitch702

    GJ Motorsports 3rd Brake Light Wiring

    Can someone post a picture of your wiring harness? I have the basic harness. I’ve done my connections and none of the s2’s will come on. Only the tiny lights come on that are plugged into the stocks wiring harness. The harness that plugs into the stock/cargo harness also had an extra wire that...
  8. stitch702

    No start after a pillar mount install?

    Well leave it to me, to make an easy install seem complicated. I attempted to install some sdhq mounts into my Gen 1 raptor in preparation for my Baja XL80’s to arrive. After the install, truck wouldn’t start and just kept clicking, had a fault track, etc, flashing, now it’s in security mode and...
  9. stitch702

    CJ Pony Parts Forum Discount Code

    Can you pm a code by any chance? Thanks.
  10. stitch702

    Bed Bolt D-Ring Tie Down Points AT COST

    I’m in for 6 when there is another buy available
  11. stitch702

    2014 Black Screw (Loaded) 36,000 miles

    I am located in the Southwest. California/Nevada area...
  12. stitch702

    2014 Black Screw (Loaded) 36,000 miles

    Local guy has a 2014 Black Screw that's loaded with 801a and graphics package. Bedliner, bead lock wheels, magnaflow exhaust, afe intake, sct tuner, etc. Truck is clean and no accidents. Typical Mall Crawler. He wants 46,000. I've offered him 42k, but he won't budge. Is he asking a fair price...
  13. stitch702

    2014 Roush Package Screw

    I found an out of state dealer with a 2014 Screw Raptor with Roush Package (nonserialized). Raptor has 44,000 miles and dealer wants $45,000. Carfax and Autocheck both say the vehicle has a clean title, but reports that the vehicle was involved in a minor rear end collision that needed the tail...
  14. stitch702

    Need input - 2013 Raptor

    I'd say that's a pretty good deal considering the low miles. However if you can get it for 38-40k that would be a great deal, but I wouldn't feel bad for 42k if it's clean, well taken care of, and full options. I'm seeing low mileage raptors still going for high 40's. Sent from my iPad using...
  15. stitch702

    $44,000 for a 2014 SCAB

    Well the guy responded back saying that my offer of 40K was unrealistic for a mint 2014 Raptor and wished me good luck on my search. It's too bad we couldn't make a deal, but there are others out there. Thanks for your advice guys, the search continues :biggrin: ---------- Post added at 06:33...
  16. stitch702

    $44,000 for a 2014 SCAB

    What in your opinion is a good price you'd offer for it? I know when I set out to to shop for a raptor I had a number in my head of 35k to 40k. I live in Southern Nevada and with its wide open desert terrain, these vehicles are still demanding a premium. I've shopped for vehicles in my price...
  17. stitch702

    $44,000 for a 2014 SCAB

    So as far as negotiating goes, dealer said his bottom dollar is 43000, which is 1000 below asking price. It is a smaller mom and pop owned dealership and the vehicle is on co-signment. I've placed a link to the ad for better pictures of the vehicle. The website says that it is sold, but...
  18. stitch702

    $44,000 for a 2014 SCAB

    Exactly! Raptors for sale here are high 40K to mid 50K on the West Coast. Hopefully this isn't one of those too good to be true deals. I'll take a look at it soon, test drive it, have another third party mechanic check it out. Hopefully the dealer and I can come to a deal and I can have it...
  19. stitch702

    $44,000 for a 2014 SCAB

    It has the 801A package, graphics package, and some other things. MBRP exhaust and an intake. I was thinking of offering him $5000 below his asking price and then work from there...
  20. stitch702

    $44,000 for a 2014 SCAB

    Hey guys first post, but I have been a lurker for a good amount of time. I found this SCAB back home on the East Coast. I currently live in Las Vegas and with its desert terrain, used raptor prices are still demanding a premium. While visiting family I came across this used 2014 Terrain colored...
Top