Search results

I mounted them in a different spot. They do exactly what I was looking for which is to add enough light for the camera to give a clear view when backing up at night.

Sport -1

I own a PC and the difference in day to day driving is night and day. It eliminates the programed in delay in the throttle opening that is there no matter how fast you push down the pedal. If I wanted more HP I would go for a tune but for plug and play I am happy with the PC.

Sounds like you might have damaged the plug if you had to force it off. Once you get the right sequence it should come right off.

Lift the clip first then push where shown to release

They do completely different things. I run both and the work well together. The PC fixes the initial lag in the throttle opening. The Flowmaster adds boost so you feel a little more power once the turbos are spooled up.

Push where shown to release after pushing the red clip up.

Good decision. I have used Rigid lights with great success on my Jeep but the Radiance cubes on my Raptor are a big disappointment. You know going in that there are higher output lights but you trade that for the amber backlight. I did not expect the backlight to be so faint.

I am at 7,000 mile of PC bliss

There is no direct mechanical connection between the pedal and the throttle. The computer tells the throttle how fast to react when you press the peddal and how far to open when you press it so much. You can floor it as fast as you want the computer only opens it so fast. The PC let's you change...

It takes a few seconds once you know where to pull and press. That is why I made up the diagram.

Red clip goes up first the push in a it comes right off. I get the frustration. It took me hours to figure it out!

I have had mine installed for about 6K miles. No downside. All you have to do is turn it off and you know how much of a difference it makes.

Jeff gives you a good decription of the beam pattern of the different options on his web site. https://fordraptorlights.com/collections/6-lights-per-kit-triple-bezel

That is the kit I have. I am dissapointed with the light output of the Radiance cubes. You get 4 Rigid cubes with Amber Halo and white main light. The Amber Halo is not very bright at all. The camera picks it up in the photo above but it's not that bright. To get that you give up output from the...

After just living through the Houston floods and getting caught in deep water it's not something you intentionally do.

Looking forward to pics of them installed

There is a tab to release it. Once you find it not that much force is needed so don't force it. Edit to add: There is also a retainer with attached wire tie that needs to be cut

The shock sensor cable plugs in behind the port. You unplug the connector behind and plug the shock sensor cable in and the plug you removed from the port goes into the other end of the shock sensor cable.

Mounted the LED in the collision warning light mount plate. It pops right out. Taped a weight to the wire to get it to drop though the back of dash.

They look like Rigid D Series flush mount. That is pic is not a current Gen Raptor. I tried but could not find a could not find a spot big enough on my 2017 bumper to mount them.

https://bajamod.com/detail.php?product_code=BM1016

I am locking with button on the door. Should that do it?

Thx. I used the Baja bracket. Easy install. Let me play with it some more. I might not be giving it enough time to activate before testing.

Jerry at Houstoncartronics did the install. The kit comes from https://fordraptorlights.com/