I tuned the kicker key with the sub unhooked. But that gives me thought to if the volume of the input changes when you tune the kicker key? I cant see how it would or should. Maybe I will try re tuning it.
Why does the amp not work good in bi amp mode? Seems to work ok for me.
Just trying to...
The RCAs I am using are labeled and I have tried only the rear and the sub ones both in their respective locations on the PAP and swapped. I am not using rear speakers however, only front components and the sub.
Is there a way to test using a voltmeter on what each pre amp output should be?
How do you like the MTI 10”? Does it hit the seat when it’s in the up position? That’s the only thing I worry about since I normally ride with it up for extra cargo capacity.
So I did a little testing. The bass output is no different between the rear output and the sub output RCAs on the PAP...
I tried the DSR back in 2018 when they first came out. In theory it was a great idea. However, it had too many bugs so I sent it back. Thinking the PAC Amp Pro is not much better. One thing I havent done is update the firmware.
Would the AudioControl D-5 1300 be an easier choice? I know its...
That’s what I’m saying. With it spliced I have enough to rattle the mirrors at a decent volume. With the PAC system, barely anything. Leading me to believe the PAC system is faulty or I’m missing something.
I know the system is not optimum and I will probably end up replacing it all eventually if I ever find a decent Audio shop to do it for me. But the issue is the PAC Amp Pro has virtually no bass signal. My next attempt is to try the rear RCA outputs and see what happens. There is no reason why I...
Obviously the oem box is not perfect but it’s not the problem in this equation. The sub is the one from the $500 diy thread.. Kicker CompRT 8” and the Kenwood 600watt max, 300 watt rms amp that was suggested.
The front mids and tweeters are morel Maximos and are powered by a kicker key 200. Gains are set per the instructions, any higher or lower and the limiter kicks on so I’m pretty sure it’s set correctly.
The sub is a kicker 8” in the stock sub box powered by a Kenwood 300 watt 2 channel amp...
I have a PAC Amp Pro installed on my 2017 and its never worked quite like I expected it too. The problem is the bass is too quiet. Even with the bass level knob all the way up. Ive tried manipulating the system by lowering the volume on the PAP using the minimum volume adjustment and that still...
I have a full set of 2017 shocks front and rear. 100k highway miles. Never jumped or off roaded. The rears work perfectly fine but the fronts feel like they need a rebuild-kind of a floaty feeling when you hit a dip in the road. I would take $250 each. Even if you sent them off to be rebuilt by...
Bi Amp mode yes. I did the Kicker tune by the book, all settings flat, sub disconnected as well as rear speakers. The only issue I have with the Kicker key is that its not turning on without a remote power wire which is not a big deal now that I have one run.
Ok, I guess I was doing something wrong. Now my sub is independent from the rest of the speakers and not controlled by the fader. But, it is still very quiet compared to before. I guess Ill just have to live with it for now. I cant find any decent Car audio shops in my area that will take a look...
Got the Kicker Key and Pac Amp Pro installed but not with out a few minor issues that Ive got mostly worked out. Remote sensing turn on does not work on either of my amps now for some reason. I had to run a remote lead to get them to turn on.
Still have a couple questions maybe someone can...
Finally getting around to installing the Kicker Key. So I need to run in biamp mode and only need front low level inputs? Also Amp 1 wires go to tweeter wires on the harness or do I need to run stand alone wires to the tweeters? I’ve heard both ways. Amp 2 wires go to front door speakers and...
Does anyone have any recommendations for a hard tonneau cover that will still allow access to a toolbox in the front that is below the top of the bed rail? I’m guessing it would need to be a tri fold. Just curious if anyone else has done this and what they used.
Im looking to add a little more power to my Morel Component speakers in the front of my 2017 Sony system. Does anyone have any advice or pics on how to install the Kicker Key amp?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.