Search results

  1. R

    GEN 1 Exhaust Manifold Leak

    I am in the middle of this right now. Developed a really loud exhaust leak when cold on the right side. Dropped it off at mechanic on Monday. One of the studs (bolts?) broke while the manifold was coming out. He is trying to fix with the engine in but isn't sure he can. If not it will be...
  2. R

    Maybe exhaust leak?

    I have a 2013 Raptor. Recently a ticking has started on the right side of the engine. Starts out loud when the motor is cold but then goes away as the engine heats up. Even when warm I can hear the ticking under acceleration coming from the right side. Almost positive it is an exhaust leak...
  3. R

    2013 Raptor - What is my suspension upgrade path?

    Hi. I have a 2013 Raptor. Has the RPG Stage 4 suspension on it. Basically bigger upfront coilovers, new UCA's, external bypass in the rear, deavers, bump stop frame. I also have the SVC traction bars. I spend a lot of time in Baja hunting, camping etc. I also chase for a Trophy truck team...
  4. R

    37s installed!

    I have a supercharger so don’t plan to regear. I do find myself running in M more to keep it in gear and not have it downshift….
  5. R

    37s installed!

    I have fox coilovers…
  6. R

    Bedside Racks Installed!

    Swing cases? What are those? I am curious...
  7. R

    What did u do to your raptor today?

    Finishing outfitting the major items on my bed racks. All that remains is a fluid holder and tow strap.
  8. R

    Bedside Racks Installed!

    Just got back from hunting in Mexico so I have an excuse!!!! Getting cleaned today!
  9. R

    Bed Extender Help!

    So I went to remove my bed extenders, firstly to enable my installation of by Bed Racks but secondly to replace the main bolts which has corroded some. Unfortunately the press in piece that the main bolt screws into appears to have come off. It fell backwards into the frame (I had to retrieve...
  10. R

    Bedside Racks Installed!

    Was pretty easy to install aside from trimming the bedliner from the existing bolts. Fitment is good and works with my Alpha 1 Rack and tonneau cover. I can also use my bed extenders if I remove the items from the racks. Still have a few things to install on the racks; hi-lift, extinguisher...
  11. R

    What did u do to your raptor today?

    Thanks for the photos!!! That is really helpful. I might skip the fire extinguisher as I have a mount for that on my bedrack so that I have the room for fluids. I got the exact same axe as you! BuiltRight recommended I order these for the Hi Lift. Hopefully they work...
  12. R

    What did u do to your raptor today?

    I got the Volant version too...just didn't say as most people don't know Volant. Excited about it!!!
  13. R

    What did u do to your raptor today?

    Bunch of stuff done and in the works... 1. Switched to 37's 2. Fixed the tailgate latch (wasn't opening easily) 3. Ordered up BuiltRight Bedside Racks (mounting my Hi Lift, Axe, Shovel, Tow Strap, Oil Container Holder and Fire Extinguisher...if I can get it all to fit!!!) 4. Ordered a Corsa...
  14. R

    37s installed!

    Local shop did it. No problems encountered and went perfect. They didn't take any photos unfortunately but said it took around an hour to do.
  15. R

    Coming soon to a Gen 1 Raptor...

    Yea not sure I would use that kit...
  16. R

    Coming soon to a Gen 1 Raptor...

    SVC makes it for Gen 1. I have them on my Raptor.
  17. R

    37s installed!

    Not sure if I will do it or just have my local shop do it. I am buried with work and kids sports this week and leave for hunting in Mexico next week so need it done fast!!! Will post photos if I end up doing it myself!!
  18. R

    37s installed!

    Thanks for the nice comments! I am prepared to go to fiberglass if I need to. Hopefully bending the pinch welds etc. will be all I need to do... We shall see! Getting that done this week!
  19. R

    37s installed!

    Got my BFG 37's installed today. I have the RPG Stage IV suspension. I confirmed with them that it will bolt right up no problem except you have to cut/bend the pinch weld in the front (will do that this weekend or next week). Still pretty tight in places when you turn the wheel but on the...
  20. R

    What did u do to your raptor today?

    1. Trim piece on the pull out step broke off while working the Baja 400. Dealer wanted over $150 so instead I just glued the old one back on... 2. Ordered the Volant exhaust for my truck. Been wanting to do that for awhile... will report once installed. 3. Put Baja Designs covers on all...
  21. R

    Dirty Deeds Exhaust

    This won't work with the SVC Traction Bars correct?
  22. R

    Motorcraft 200amp Alternator work?

    I found a dealership online that still had them. I could look it up if you like?
  23. R

    Motorcraft 200amp Alternator work?

    Great point! And reminds me that I never returned my core! DOH! Oh well I guess I have a spare now.
Top