I have the first batch of PNW brake lights ready to ship. Still working on the website but if you want one now just send me a PM and i'll get them shipped out.
PNW_1 Gen 1 Raptor Overview
This billet aluminum brake light fits 2010-2014 Ford Raptors and allows for the installation of 3 Baja...
There's a new 3rd brake light coming to market soon. Similar to GJ and RPG.
- Billet aluminum housing.
- Allows the installation of 3 Baja Designs S2 lights.
- Uses factory bolt locations.
- No cutting or drilling.
- Comes with 3 prewired red LEDs for brake and marker lights.
- Powder coated...
I have a set of Gen 2 shocks that need rebuilt. I’m not rebuilding Gen 2s anymore so I’m selling off my stock. Tears have schrader valves installed and 2 extra valves will be included for the fronts. Shipping available but local pick up is preferred
$600.00 local pick up in everett, wa
Buyer...
I have a used Gen 1 GJ 3rd brake light. All LEDs work but you will have to cut your existing harness or rewire it. It's only 2 wires so pretty simple to figure out. There is some RTV remanants on the top and sides and some weird stain on the top but if you want a perfect clean brake light...
Does anyone know what kind of connector this is? Its the OEM connector on our 3rd brake light. I don't need the harness, i just need the connector shown in the pic. I found one from the connector experts but its $90. i have to believe you can find these in bulk much cheaper.
Rebuilding my King bumps and just curious what oil volume to add. Also, since its basically an emulsion shock, do you do anything special when adding the oil and nitrogen? I was thinking of adding the oil, then open the schrader valve and compress the shock to expel all the air and then fill...
Custom made bed supports for ALL Raptors. Comes with all stainless steel mounting hardware and uses existing bed bolt and existing holes in bedsides. No drilling required. An extra hole is provided if you want to drill an additional hole in the bed but it is not required.
$250.00 Local pick...
I have a set of custom made bed supports for Gen 1 Raptors. These are brand new never installed. They use existing holes in the bed side as well as the existing bed bolt so no drilling required. There is an additional hole if you'd like to add a 4th bolt but it isn't necessary.
$250.00...
So i've had the driveshaft clunk for a long time now and i tried greasing the yoke and that lasted for a few days so it wasn't really worth it. Recently i replaced the yoke with a new one and i believe it was this part number BL3Z-4841-F. The clunk went away completely except when it rains...
How often do you guys replace leaf spring and shackle bushings? I put deavers on about 80-90k ago and i can't really notice anything out of the ordinary, but i'm just wondering for general maintenance. Is it possible to replace the shackle bushings without removing the entire leaf pack? The...
How long have your front rotors been lasting? I bought the power stop full kit with carbon/ceramic pads and rotors in 2017. Replaced rotors with the same ones in 2021 but went with oem pads. Now I'm starting to get some shaking under hard braking now so feels like i need new rotors. Seems...
RPG makes a 5 link a 5 link kit for the Gen 2s and I've heard they are close to having one for the Gen 1's as well. Whats everyone's thoughts on this? Is it worth the money to get rid of the leafs and go linked? I kind of like the idea of a linked truck and still having most of the bed intact...
I've been getting an intermittent clunk when engaging 4wd. It only seems to happen if i engage before going up a steep logging road. If i engage 4wd on flat ground its fine and if i engage well before the hill i'm fine. Its a very violent clunk like something is slamming into engagment and...
Has anyone added a rear view camera to their GJ 3rd Brake Light? I see that Evil Manufacturing has a kit to add 2 cameras in their center light location and i was wondering if it would fit in the GJ housing. I'm only really looking for a rear view camera that records on a loop like the dash...
Long shot but does anyone have a trashed gen 2 shock they don’t want. I just need the top cap. I do have a call into fox but figured I’d ask here too. I believe the front and rear are the same so it doesn’t matter. Just need the part below
Looking for 2.5x2.5 Bump Stops, Kings or Fox. Would also be interested in the full kit if you have it but for now just looking for the cans. If they need rebuilding, thats ok too.
I'm looking to upgrade my shocks to 3.0 and i'm in the research phase right now so i was wondering if anyone can answer some questions.
1. Kings or Fox? I see about a 50/50 split and from my reading it seems like the Fox's are a little better quality but more expensive. Is it worth the extra...
My passenger side brake lights were working intermittently last week and now are not working at all. I was running LED tail lights and have since switched to OEM with halogen bulbs and an LED reverse light bulb. The brake lights still don't work and neither do the turn signals, but only on the...
So I've got the bug to upgrade my rear suspension and having trouble deciding what i want to do. Currently I'm on Deaver SD+2 and stock shocks and 35s. I"m looking for that floaty endless travel feeling on the road (if possible) and still be able to handle the rough logging and fire roads we...
I just had new Ridge Grapplers installed and wanted to share a few thing related to wheels/tires. I bought the tires at discount tire and when they finished the guy said they were aired up to 50 psi which i don't understand why they pump them up that high. So when i got home i aired down to...
Is anyone running Evils bump stop kit? I'm planning to pick one up in the next few weeks and just curious on the install and if there's any tricks. I know getting the nuts in the frame can be tricky and i thought SVC or RPG give you a tool so just curious how the Evil one is.
I'm offering Gen 2 Non Live Valve shock rebuilds if you are local to Washington state. If you're interested please PM me and i will email you an order form. Prices start at $700.00 for a set of 4 with a $500.00 refundable deposit so $1200.00 total at pick up. This is an exchange program so...
Theres a ton of threads out there on gen 1 vs gen 2 shocks and I've always been skeptical about running gen 2s on a gen 1 but after opening up a gen 2 shock i might be changing my mind. Here is a comparison between the 2 shocks with numbers. I'll let you decide which is better.
REAR SHOCKS...
Have a pair of cyclones in amber. I had them mounted in my bed for so i could unload the truck with some more light. I now have a GJ 3rd brake light so no longer need these.
$40.00 local pick up (Everett, wa)
$50.00 shipped
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.