I saw that! Made me very interested. I’d like to hear a couple more reviews from others that have tried it. It’s new so I’m a little gun shy on it, hoping they are at the off-road expo this weekend so I can talk to them
60W implies you are look at a Rugged Radios setup? I have personal feelings against them that I won’t go in to, on top of that my opinion is that they provide substandard products.
I use PCI for all comms setups. Why? Because they provide better equipment and support Baja racers, on top of...
Last I had heard they do, and they like them. I haven't spoken to Duncan in a while though, so I could be wrong.... They are also just shocks, not magic
Leafs are disassembled to cycle and check bump and droop (and set bumpstops). In order to do this properly you need to take up the space of the leaf springs that are removed to make sure all measurements are correct.
btw i cut down those leaf bolts and got it to bump slightly higher...
Speaking of EXO, the goals for the truck to prep for the 1k and EXO Baja Sur trip are:
1) Rear suspension: Truck needs up travel bad (as do all Raptors). Going to try swapping back to factory shackles, and if necessary take the deavers back to Deaver to add another inch of ride height
(I would...
My main insight is that you should do it. Don't worry about what mods you have done to your truck, it really doesn't matter. There are guys there with an easy $100k in to their truck and there are guys like me who have a mostly stock truck. Some people will want to haul *** and be first, and...
Almost forgot, thought I'd be "smart" and get rid of the exhaust tips that hang below the rear bumper... easiest way to do that is to just remove the whole rear section of exhaust, right?
well I underestimated how much heat would be directed right towards the rear bumper is where there are a...
I ran around with zero lift and 37's for quite a while. Then I knew my prerunner projects weren't going to be close to ready for desert season, so I started prepping the raptor to bounce around in the dirt/dunes with.
G+J 3rd brake light, Baja D lights, and antenna mount (plus a 110w race...
First real mods were beadlocks and 37's
Why real beadlocks? Two reasons: My wife drives this when we are at the dunes, and when in Mexico rescuing racecars in silt. In both situations I want to basically be able to have the driver put the tires in single digit pressures (or lower if...
Bought my truck in July from Team Ford of Vegas
2020 801A
Goals are a reliable daily driver that can be taken south of the border to bounce around and chase my buddies that race
I was tugging on various lines trying to figure out why my front end is unloading/releasing in 4wd under load. Needless to say I haven't figured that problem out but I created this one. I don't think the problem from this thread is common, however it did break off super easy.... On to the next...
Thank you. Sadly still took me some searching to verify. It appears there is some overlap in part numbers or I am incompetent... Either way I found it and you were right.
Does it help others to have the complete part #? This is what I ordered:
JL3Z-2420-AA
Gents, been having issues with my 4wd disengaging under load, naturally I was messing with the lines.... The line that connects to the IWE check valve at the "brake booster" source snapped off. Having trouble ID'ing this part in the online parts diagrams I can find, can you help me diagnose...
What is the OEM part number for the boots? When I look it up based on my vin it states "without Raptor" ... Weird that its not super easy to find. Or I'm blind?
I run around Glamis @10psi, its awesome. I also drive too and from each end of Glamis on the road (7-8miles) @10psi, I just keep it under 55-60. As previously mentioned its just gas mileage and a little tire wear. It is a little wallowee at that pressure. In the sand i'd go do deep in to the...
I've read a few posts from you stating that you could've purchased a dedicated purpose built prerunner for the money you have in your raptor. Lets imagine you were to do it all over again, starting from scratch, if you had your dedicated prerunner, how would you change the setup to your raptor...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.