Search results

Nice truck. Looks like previous owner had Timbren air bags for towing and left some parts behind.

I just did a quick google search and found it. Timbren ses suspension enhancement system skew #fr150rb. Helps prevent the rear from sagging when towing or hauling stuff. You are on the right track though with Eibach and Icons, just add in a bump stop kit and you are set.

He just likes the Gen 1 too much!!!

Thank again for the tour and excellent pictures @John M. It was a blast and the scenery was amazing. And I know the truck was dirty but I was smuggling in Texas dirt from TRR! :cool:

If you are not running the wires into the center console to use for the dvd option it is actually not that bad. Just have to remove the pieces in the center of the dash and nothing in the center console. Hardest part is just removing the screws for the parts and prying it to get to the screen to...

Check on kijiji for Nokian tires as you can sometimes find good deals. I bought a set of 6 studded Nokian tires last summer with on 1000km on them for $1500, as the previous owner bought them for his dually lifted Dodge and then sold it for a Jeep SUV. Tires were like new with no missing studs...

I am no expert on brakes but with the wear on the inner one and the rotor still looking pretty good besides the lines on it, what are the chances the one was defective and the pad came off?

Check with pick a part places for the panel that goes across the tailgate. Lots cheaper then buying the new one through dealers. Really easy to do and if you line-x your tailgate and the panel cover part color does not matter. Just remove the pole mount and it is an easy install. I did the same...

I got the Tapiona XXL dog seat cover for my truck. Got it off Amazon when it went on sale for around $79CDN as it us usually around $130CDN. Works with seats up or down but I usually just leave them up. Make sure you get door protector covers to so you can keep the doors from getting scratched...

The is the Leitner Active Cargo System Classic model. I just got one this year for my truck.

Sent you a PM.

That's why I used big c-clamps. Clamped down, removed bolts, slowly released c-clamps to get leafs changed, then used a long punch to keep the holes aligned while I tightened them back up. That way the bolts were never in any danger of the threats being damaged at all.

I just set them down on one side on cardboard, used a couple big C-clamps and it was very simple to change to option 2. Does not take too long at all.

If you check out my albums pages there is a pic or two on there.

He makes it real easy as his harnesses and wiring are top notch and the Littlefuse setup makes it easy to install. Hardest part is the cutting into your headliner. Just have to take it slow and careful is all.

Check out www.lvjmotorsports.com. Keith makes excellent stuff, switches for the cubby in the dash or where the trailer brake control is as well as overhead ones. I have one with the TH9800 radio with 4 extra switches mounted in front of the overhead sunglass holder in my 2014.

I have a modified Lex Motorsports Baja Brute rear bumper. It has the rear sensor mounts and 2 spots your can mount rear facing lights as well.

The B&M only sits a couple inches lower. I have a skid plate behind the engine on to protect the transmission and exhaust y-pipe and have 2-3 inches clearance still with it on.

I just did all of those this year. Truck was at 100,000km so I went with the upgrades at the same time. Also did Granatelli wires too. Got the Saudi cooler through another members and I got the wires, B&M oil pan and B&M transmission dip stick (as well as a fire sleeve) through...

Check out BuiltRight Industries and Ram Mounts.

Take your time and get better @RDFTS. We are all thinking of you.

I got sunrise tactical gear to protect the bottom of the seat and for the molle as well of course. I just used a towel for the back of the seat. www.sunrisetacticalgear.com

Purchased. Order #2442. Great idea and kit. Was going to wait for a specific Gen 1 kit but did not want to wait. :)

I keep mine in an ammo can (I think it is for 30mm ammo). Water/dust proof, can be strapped down securely and lockable (I added u-bolts to secure it, with protection for the rope inside from rubbing on the bolt heads) lots of room inside and holds bubba rope and hard and soft shackles.

I never had one of those but easy for you to check. When mounted they sit just inside the lip on the top of the bed rails. I would think you would have lots of clearance from them though from looking at pictures of how the fold back.