Search results

I had exactly the same thing happen with Amazon TWICE now. Second one is going back and I'll find one somewhere else that is complete. Only difference was my boxes were in good shape and no rips or damage anywhere.

Anybody else have a problem finding these fuses? I tried NAPA, another auto parts store and 2 hardware stores. None of them ever heard of them. My nearest Ford dealer is 30 miles away. I want to change one for my fog lights from 10 to 15 amps. 'Course I'm up here near nothing. 15 miles to...

Well you know where to get some if you want to put some back on. :)

Received my truck and have the rear graphics package. They are in a 8 1/2" x 50" long tube and weigh 5.7#. I checked them out and they are fine and there is an installation instruction book with them. After scanning the booklet I would recommend having a professional install them. From what I...

Success finally. Sent my wife out to try it and it actually worked. The airbag light never came on but she buckled and unbuckled the belt one more time and got the confirmation flashes. When we went out last night the damn thing wasn't ringing for 5 minutes everytime I started the truck. :waytogo:

First 10x I didn't have parking brake set. Since then I have and have followed the instructions to the letter. After step 3 my airbag light never comes on. I will try again tomorrow.

I have followed the instructions in the owners manual to disable the seat belt reminder chime at least 10x with no luck. I do not have MyKey active so it should work. Any tricks to this? Yeah, I know we should always wear our seatbelts but I usually don't unless I'm in a state that requires it...

Thanks to pirate air I found mine was built on 3/17. As agent 86 would say "Missed it by thaaat much!". :waytogo:

I got a couple pieces of 8 1/2 x 11 paper with mine with numbers all over them. Build sheets maybe? If so they are dated 3/17 so I assume that was the build date. I haven't detected any clunk yet but I still have less than 200 miles on it.

Thanks, that's what I figured.

Probably not the toughest tech question you'll ever get but just what are the hood and front fenders made from? 2011 Ford F-150 book says aluminum hood and nothing about fenders but I'll swear my fenders and hood are some type of FRP. Edit: Any threads on this you remember?

I have to find the location of my plugs as they are located behind my drop in bedliner. Just have to find another 5'5" bed and measure it.

Too late, already have the bed liner installed. For what I do it should work ok. My problem was the rails were a tad too long. Bak said I could cut them a little and not void the warranty but it turned out I didn't have to. I put 1 clamp on and then TAPPED the end of the rails with a plastic...

Has anyone installed an F1 with a Ford drop-in bedliner in place. Did you have to cut the rails at all or have any other problems?

Not hardly, I have 5 boats myself although no big ones anymore. My Raptor is now in Mass. after being picked up in Alabama 6/13. Due to me by noon tomorrow 6/14. Finally. My F1 Bakflip is patiently wating in the garage for install as are a few more items.

Hope it continues in case I have an issue. I have had mine for over a week but truck isn't due til 6/13 so I haven't opened box yet. Also got mine from Truckchamp.

It can help with glare reduction but my main reason is that I like the look.

My original dealer said he confirmed with Ford that nav would go into customer ordered vehicles but NOT any ordered for stock. I believe someone else also confirmed this but I of course can't find it right now. Before I knew that I cancelled my order and bought one from a dealers stock. I...

Well my big change is still coming. My truck is still sitting in Alabama awaiting shipment to me. 'Course I sold my Avalanche which gets picked up tomorrow so I'm down to driving either my tractor or a Corvette. At least it finally stopped raining after 2 solid weeks. Still, I'll take that...

Oh I agree it would be easier. It's just that the law here says you cannot have fog and hi-beams on at same time. Same as driving lights and low beams. My other vehicles do it automatically if I have the fog light switch on; I'd just like this to be the same. My light bar was getting powder...

OK, I have read everything I could find on here and watched the video and am now totally confused. Here's why. I would like my fog lights to go off when my high beams come on and my driving lights to go off when the low beams come on. Not all 4 running at the same time and of course the upfitter...

A friend of mine owned a body shop and I used to help him out once in a while. I had to install those old woodgrain decals on the entire side of a Ford Country squire wagon one time. Boy, what a PITA that was. I imagine the hood decal would be similar. The real trick is to use the spray bottle...

Yes, it was factory ordered but they shipped in the truck. The other Raptor I looked at in Maine had both hood and mud graphics factory ordered but neither was installed. Maybe something changed? These were both March/April ships.

Throw it in the bed. Times will improve.:waytogo:

Don't you just love it when you find something like that? Back in the day I had a new 69 428 Cobrajet Mustang w/ every option. One day at the Ford dealer we found a black hose about 3+ feet long wrapped around the base of the carb. Neither the dealer tech nor I had any clue what it was. I guess...