Search results

Thanks again for the support guys. We dont want to sacrafice our quality to increase sales. We do plan on making bumpers again when we can handle the level of production involved. Everyone with orders will receive them. We have the pedal kits back from the laser and they are in powder, so...

Guys Im extremely sorry to all of you who have been trying to contact us. We lost our sales person and have since been overwhelmed with calls and orders. Due to the large volume of orders we will be stopping production of all wicked performance raptor bumpers. For all of you who have orders...

Sorry about that our phone system has been working one day and not the next. We were in the middle of a run of dead pedals when you made your order. They are all done and awaiting shipment. They should be leaving today or monday.

Rust Our prep and powder coat is a 4 step process. The bumper is media blasted and cleaned. Then it is cleaned in an acid bath that removes and grease or oil from touching or other contamination. The bumper is then treated with a spray on rust inhibitor. We then heat the bumper in the oven...

We did it for 200$. Its kinda of high but since each logo is different we have to change the drawing and the tool paths.

No problem. Sorry again for the wait we are wicked busy around here!

We also make a hidden mount for winches. We dont have it on the website because there are so many variations in winches. We would be happy to send you one to see if you can shoe horn that sucker in there. I would like to know if it fits. [email protected] we can figure...

We use Avery vinyl for most of our jobs. We also use 3M. The truck pictured is Avery. Ill get some bigger pics up shortly.

There is no benefit at all. It took about 1hr to cut the whole thing because it had to be flipped over. Because its hollow underneath to fit over the stubs on the bracket. The customer asked for aluminum so that's how we did it. I thought it was unnecessary, but a lot of things I make are. HAHA

I wish we could do an SVT. But Ford doesn't seem to like when we do that.

We machined this custom badge for a customers raptor. Its Billet 6061 aluminum with his company logo in it. Just wanted to see if anyone had interest in something like this.

We actually based all of ours off the truck vault design. Theirs are also wood. They are all going to be reinforced with aluminum angle then primed, rhino lined and then interior carpet. We did it this way so that we could easily more dividers in the drawers. The drawers are able to support...

This model runs on a 12 volt system it has to batteries but the or in series not parallel. Which made it much easier for us. This is actually a 1996 model. It was built as a civilian hummer. We decided against the turret due to the cost. We do have a sliding roof and pintle mounts for...

Your looking at about 500 in material and whatever time is depending on trim and other things that get removed. The raptor screw we did was 2500$. So its not bad when you can just remove it later. Its great for a lease car because it protects the factory paint and can be removed down the line.

We are located in Ohio the truck will be headed to texas. ---------- Post added at 08:51 AM ---------- Previous post was at 08:37 AM ---------- We cut back the front fenders to give the hummer a whole new look. We will be fiber glassing in a small flair to help with spray from the tires. But...

It will be used out doors also. They hunt wild boar with it. The will actually have a belt fed .50cal on the main turret and it will be used. The interior is getting rhino lined for easy clean out. Th will be replaced tranny will be replaced shortly to increase top speed. I thought the...

This build was put on the back order while we tried to agree on all of the design elements and the intended use of the vehicle. We have designed it to be a show vehicle and a get out and rip up some turf truck. Heres some updated pictures. We plan on having it finished the end of next month...

Heres some pictures of a few flat black wraps we did last week. We also do full printed vinyl wraps and rhino lining. Time to shave all the badges. Let the fun begin. Careful... Heres some picture of the Raptero. Our chase vehicle also wrapped and rino lined...

Hey guys. We have been having problems with our phone system. We tried upgrading using the same old phone system and everything has gone to hell. If you need to contact us email me directly at [email protected]. I will get back to you same day. Sorry for any confusion this...

Ya guys we are still here. We have been having technical problems on the website when an update was tried. Everything is back in order. We have also been having a problem with our new phone system. If you have any trouble reaching us just email me directly at...

Steve I talked to joe and he told me that he had sent those out to you.

Shims will fix both of those problems. By adding the shims at the top of the mounting brackets it will bring the middle down and the ends up. We have specially made shims for the bumpers that fit around the mounts so that the integrity of the bumper is not effected. All of the bumpers are...

Ok guys we have the problem fixed it was not so much the weather but the bad powder we received. We are re spraying the bumpers now. We are extremely sorry for everyone who had products waiting due to the problem we will be shipping everything out this week. We thank everyone whop has had to...

Both of your bumpers are complete they are at powder coating where the problem has arisen. Due to crazy temperature swings here we are having troubles keeping the powder coat buildings temperature steady and its causing inconsistency in the powder adhesion. We are trying to get the problem...

Guys. I'm extremely sorry for the delay on your bumpers. As far as I have seen I have returned all emails on the subject. If I did however miss an email I'm extremely sorry there is no excuse. We have had extreme weather fluctuations in Cleveland. Going from extremely hot right back to...