Thanks to FarFromStocks recommendation to check with USPS media mail the shipping to 94044 should be around $10 for the manuals.
Thanks FarFromStock!! I never new about that shipping method which saves a lot on shipping.
FN-2187
It looks like UPS Ground would be the cheapest but still would...
I traded in my 2010 Ford Raptor for a Wrangler JKU Rubicon Recon back in April 2017 and realize I don't need the Workshop and Wiring Diagrams manuals anymore and would like to sell them.
Here is what I have for sale:
1- 2010 F-150 Workshop Manual Volume 1
1- 2010 F-150 Workshop Manual Volume 2...
Old Spark Plug gap after removal from engine
Has anyone measured the spark plug gaps of each old spark plug after removing it from their engine?
When I did mine, I checked each spark plug to see what the gap was after removing them and found that the gaps varied a lot.
The gaps ranged...
I just did mine and it took me 6 hours total for all 16.
I did the upper plugs in 3.5 hours and the lower plugs took 2.5 hours.
I know that seems long but I took my time with each plug and made sure each new plug was properly gapped and torqued.
---------- Post added at 07:32 PM ----------...
Thanks Chris:
Before I read your post I went and pulled the fill plug out and siphoned some of the fluid out like Stang had suggested so it ended up being close to the 1/4" below the fill hole as the manual states. I was worried that maybe the fluid expanded a lot when hot that it may have...
I agree, lesson learned!! I did it the first time myself but was unable to get the cover completely out of the vehicle which made it hard for me to clean all the silicone off the surfaces and thought I would see if the dealer could remove cover easily from the vehicle after it was unbolted so I...
Took the raptor to the dealer to have the front diff fluid changed on 4 Dec 2015 and they spent about 2.5 hours on it.
I told the service tech that I brought it in thinking that they new an easy way to remove the cover from the vehicle once it was unbolted but they did not.
They said that they...
I recently changed fluid in my transfer case and had filled it until the fluid started to come out the fill hole. My Bad!!
I know that it states the level should be 1/4" below the fill hole.
Can someone tell me what damage this may cause to the transfer case?
I can take some out if...
Passed Emissions Inspection With Tune On!!
Just wanted to update everyone and let you all know that my State Inspection and Emissions test was due this month and I kept the SVC tune on the truck and it passed the Emissions test with no problems. Thanks!! SVC!!
Hello:
Just wanted to ask if anyone else is experiencing very slow loading of threads on this site?
When I click on a thread, my browser seems to hang up, and takes anywhere from 30 seconds to 60 seconds to load the thread I click on, and sometimes it just doesn't take me there. It is...
Goodyears answer to tire pressure for OEM size Duratrac tires
I recently sent an E-mail to Goodyear asking what tire pressure they would recommend for the Duratrac tires in the OEM size and I thought I would pass the information along for everyone to see what they recommend.
I'm not saying...
After a lot of research on different forums including this one, there seems to be a lot of different PSI recommendations for just this one tire and wheel combonation so I have decided to just go with the PSI recommended on the door panel which is 44 PSI front and back.
Thanks to everyone that...
I am hoping that everyone with this size Duratrac tire will post what PSI they are running and note if it is on a supercab or a supercrew Raptor because I would think the truck weight differs from Scab to Screw and please post if the wheels are stock size.
I am just curious to see if the PSI...
My door sticker says to run 44 psi in both the front and rear with stock tires. I did that for the life of the stock tires which I rotated every 3,000 miles not 5,000 and at the end of their tread life, which was 49,000 miles. I see that the center of the tread has worn a little more than the...
I have the tire pressure at 43 psi front and back I'm not sure what pressure everyone else is running in their duratacs.
---------- Post added at 06:51 PM ---------- Previous post was at 06:47 PM ----------
Thanks, I'm on the stock shock setting
Got a set of Duratac tires installed on stock rims yesterday and can't wait for some snow to try them out.
Total out the door price came to $1295.75 because the place that did the install has a trade-in program and they gave me $40 for my old tires which had 5/32 tread left.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.