Well here I go again. Another trip to the local steel shop to pick up some tubing. Time to build a bed rack
for the Gen 2. Here is my progress. I'm gonna be using the mounts already located on the truck to mount 2 side rails that everything with build off. Then building a shelf basically to...
Decided to DIP the truck for a bit of protection on trails.
I'm really liking it.
Dip Your Car was running 20% off so pulled the trigger on the "Performance Series" dip. Color is "Dude Blue"
A lot of work but man she came out nice.
BED RACK for 2010-2014 year Raptor or F150
I’m selling my custom built bed rack built by me.
Included:
- Bed Rack
- Tote
- Smittybilt CO2 tank and hose
- Smittybily tank mount
- Custom built floor jack mount
- Floor Jack and custom skid plate
- Jack handle
- Custom “removable” Tire Carrier...
TYT TH-9000D 136-174MHz 60W 200CH 8 Group Scrambler Car Truck Mobile Ham Radio
65 Watt Heavy Duty Two Way VHF Mobile Transceiver
Has GLRE and TRR channels programmed in it already.
$100 plus shipping and Paypal fees.
FOR SALE
Icon ZETA 3.0 Rear Piggyback Reservoir bypass shocks
$1000 FIRM
Shipping is up to buyer and any Paypal fees.
Shocks have around 15000 miles on them from last rebuild.
Located in Michigan
FOR SALE
SDHQ '10-14 Ford Raptor A-Pillar Light Mounts
In good condition
Cost me $125 shipped
Asking: $85.00 shipped FIRM plus Paypal fees if any
Actual pictures of mounts
I have a set of
2010 - 2014 Ford SVT Raptor 3.0 Front Coilover Shock System w/ CDC Valve freshly rebuilt new seals/ o rings and oil.
Everything needed to install is included.
ASKING: $1400.00 plus shipping and Paypal fees
Prefer local sale but will ship.
I have 2 brand new IWE's still in the boxes that I have carried around as spares.
These will not work on the new Raptor so I'm selling them.
Paid $110 for each at O"Reilly's auto parts
Asking $50.00 for each plus shipping and Paypal fees
I have a used set of Retrofitted Projectors with RGB Snake Eyes and amber whiskers.
Color: Matte Black with gloss black projector shroud
55 watt ballasts with an extra one added as spare.
"NEW" Morimoto Control wiring harness for stock halogen set-up
RGB wiring with wireless remote
New this...
For Sale (GEN 1)
Both items new were $1660.00 plus shipping
Tie rods were used for 2 months then removed due to power steering pump gone bad and didn't want Ford denying a warranty claim
so I took them off and never got around to putting them back on so they are like new.
Spindles are tig...
I'm selling these for a buddy of mine. They are brand new never mounted on a Raptor.
0 miles
Front shocks
They have some scratches on them because they've been tossed around a garage for a while.
Asking $900.00 plus shipping
LCA
$250.00 for both plus shipping.
OK guys, let's here your opinions on the location of my 10" Flex center hood mount.
YEAH OR NEAH?
I figured this location would flow with my dual flex on the hood mounts. I needed a bit more amber light and thought this might be a good location.
There is barely any glare off the hood in this...
Well I finally got my new "refurbished" power steering pump after waiting almost 2 weeks for one. Waiting for a new one was out of the question because they were on back order with out an ETA for the 5.4L.
Had a brand new one put in under warranty and lasted 350 miles and the dealer "Roy O'Brien...
Selling for a customer.
ICON Zeta 3.0 Rear Shocks
Less than 600 miles on them
Shocks work amazing only reason customer is selling is to go to a different setup.
$1600 plus shipping
I have a 40" LED light bar for sale no name brand but works fantastic, stupid bright.
Reason selling is because I'm going a different direction in lighting.
40" which is actually 39.1" is
240 watts
20400 Lumens
24pcs*10w high intensity CREE LEDs
9V - 70V DC
Waterproof IP rating...
Here is my instructional video on removing your IWE's.
watch?v=AlHDws6yFP0
IWE part number on Amazon
Amazon.com: Dorman 600-105 4WD Locking Hub Actuator: Automotive
I'd like to start off by giving a big Thank You to Joe"scrap man" for allowing us to tare up his property and Dave "dfass16" for laying out a beautiful coarse.
Without these 2 individuals this would not have been possible.
This land may have been a scrap yard but the views and scenery that it...
Looking to sell my ARE LSX tonneau cover.
Color matched to Tuxedo Black.
Purchased in 2010 for $1450.00 new Asking $800.00
This is used and sold as is, has a couple of chips, some fine scratches and fabric liner is a bit worn towards the front but over all it's in great shape.
Features:
-...
Wondering on peoples thoughts on these.
My 5.4 has 78,000 miles on it and it doesn't seem as peppy as it once did.
I'm sure over time the stock coils loose some spark.
https://www.youtube.com/watch?v=NJGzzuMhkNU
Let's hear it!
:popcorn::popcorn::popcorn::popcorn:
Just had some advertising stickers and banners made at Designs N Signs.
These things looks awesome, great service and product.
Just want to also send out a special Thank You to Amanda from Designs N Signs who helped me design the banners and stickers.
Keep up the great job guys.
I'm looking to sell both sets of wheels and tires, winter and summer.
Summer
Wheels-Moto Metal M0961 Black Satin w/Red Inserts
Tires-Cooper Discoverer Radial STT TEK3 - LT325/65R-18/E2 127N
X4
This set has roughly 12k-15k miles. They are used with surface scratches from driving in the sand...
Figured it was time to upgrade some of the more important Off-Road parts.
Purchased some Gusseted spindles and ties rods from SDHQ. Thank you Jason, great customer service.
Spent some time taping off all the machined surfaces and painted everything up for a little extra protection from the...
Voting time for your FAVORITE Commercial of FRF.
The voting will start today and end on 11/18/2013 @ 11:59pm
The winner of this contest will receive this iPad mini
Let the voting begin.
rasco
FRF Commercial - YouTube
6.2
Ford Raptor Forum - YouTube
Wilson
frf video - YouTube...
Well I got a RPG Raceline shipped in Raw metal and decided to convert it to a winch bumper and add/ tweak it a bit more.
I had a new custom built wider and thicker Aluminum skid plate laser cut to add a bit more protection to the underside.
Added some Aluminum laser cut claw side panels to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.