Search results

yes when you stall and the engine cut off your oil pressure readings at that time will trigger oil pressure low because your truck think that your engine is still running but its not .. check for vacuum leak or adjust the tune as MTF said

I will just throw this in here since this happened to me once #third brake light checked also the brake light switch #steering angle control sensor replaced with no luck #wheel speed sensor replaced with no luck #maf sensor replaced #harness behind the driver side tire checked #after almost 3...

you can fit the tire but it will still rub for sure .. and im sure it will rub on compression in low perch ,, even in mid perch i think .. i wont drive crazy untill i change the fenders

Kmc wheels +18 offset , and yes they do rub just before the steering locks ,

37", i know i need to go mid perch ..

you may need a new pcm .. this shit happened to me when I had my 2012 mustang the sct had some glitch and didn't save my full stock tune .. so when I tried to load the stock tune it wont load to 100% and I was unable to start the car .. your option is either you flash the pcm at the dealer or...

same here high speed fans will turn on before the engine operating temperature .. I have 5 star tune also

Tell us what do u find .. Maybe the fuse is blown again ?

No .. I think the hill descent control take information from too many sensors .. If somthing fail .. It will trigger it

Did you take a look at your bad maf sensor ? Mine was like a new no dust no oil thanks to volant filter But when i cleaned the filter after the faults , there was like 500 gram of dust or maybe more in the filter too bad i didnt took a pic for it, maybe this blockage tripped the fuse , but why...

Check for any blown fuse in the passenger compartment fuse panel which is located under the right hand of the instrument .. There is a small panel you can remove by pulling it toward you .. Check out these fuses , #2 , #9 , #29 if you the blown fuse , you can use one of these spare fuses #25 ...

THANK YOU You dont know how much i love you now ..lol It was the fuse you are right .. I took one spare 20A fuse from the passenger compartment and replaced the blown one .. Then started the car and TAADDAA no warnings .. Thank you so much for all your help I really appreciate it What...

THANK YOU what is ses ? and is there a different warning for limp mode or is it just a wrench light ? I replaced the MAF sensor two days ago with a new one .. so where is that fuse ? I have attached the fuse box description image I did replace the 10A fuse #37 in the...

Checked and nothing found

update .. I found that my both rear wheel sensors had metal shaving stuck on them maybe coming form the brakes .. i cleaned them reinstalled them .. and still with no luck I tried to run the truck with no maf sensor .. and the truck was running the same .. same faults came up .. so I had to...

my 2013 also had cooling problems .. but I went to recharge my ac system but I noticed that my high speed fan will turn on after at least 1 min after I turn the ac on .. even if the truck was parked for a long time .. it does not matter , the high speed fan will always turn on even if it didn't...

NO .. this will be my last option .. I had very bad experience with them .. with my 2012 mustang , and I know the first thing they will look for is the trouble codes .. and will let me replace the maf sensor , both oxygen sensors , evap valve , VCT solenoid .. then they will have to replace...

Did they fix it yet ? I dont think they are looking at the right place .. They are just looking after the codes .. Replacing vct solenoids for codes p0013 , p0023 and the maf sensor for p0103 What i think that these trouble codes will get triggered only after the wrench light which have...

update : today I replaced the steering wheel angle sensor and the problem is still there also i have noticed something strange that when the wrench light comes on .. it will throw 6 dtc codes at the same time but check engine light never comes on p0013 , p0023 , p0103 , p0135 ...

Hello so before anyone say use the search button .. I already did that with no luck my 19,000 miles 2013 raptor has the following mods 1. Volant cai 2. roush exhaust with arh longtubes and offroad y pipe 3. 170 thermostat .. because its very hot in here (Qatar) now it is 100* at night 4...

I have the same problem with my 2013 raptor .. the longer I drive the louder it gets even if I am only driving in the street .. I took it to the dealer ship to take a look at the steering column but the mechanic who tested the car with me said the sound come from the left ball joint .. they...

i like it without the bolts also so when we will see the final look with the lights installed

soooo ??

when is this going to be shipped

fixed..