Search results

  1. NUTHINGOESRITE

    Offset question... Help Please

    So, I found an online calculator that showed me the difference between the stock wheel and the one I want... Looks like I am going to have to go with something else, that wheel showed that it would stick out another 71mm from the stock. That sucks, I liked the look of a lot of those wheels that...
  2. NUTHINGOESRITE

    Offset question... Help Please

    First off, does anyone have experience with 4Play wheels?? Looking at the 4P50's for my 2011 SCREW. 20x10's with a set of 35x12.50 20R BFG A/T's. The offset is -18, which I think will make the wheel stick out around 5 1/4" from where the wheel sits against the hub. With the 35x12.50 BFG's, will...
  3. NUTHINGOESRITE

    GEN 1 Timing Chain install... HELP!!!

    Mine got me up to 536hp to the tires… but I also added exhaust with headers.
  4. NUTHINGOESRITE

    GEN 1 Is there a trick to remove your Dipstick... tube

    Took me a while to get it out, but it finally gave it up. Put a pair of vice grips around it then used a bar against the vise grips and tapped it out with a hammer from underneath. Came out in one piece, but will have to be replaced with a new one. Now to figure out what to do about a tranny...
  5. NUTHINGOESRITE

    GEN 1 Is there a trick to remove your Dipstick... tube

    I am literally in the middle of installing headers on my 2011. Drivers side went good, but the passenger side requires me to remove the dipstick tube and reinstall it once the header is in place. There is one bolt that holds everything in and then I think you are just supposed to be able to pull...
  6. NUTHINGOESRITE

    GEN 1 Timing Chain install... HELP!!!

    I took other pics, but for some reason it uploaded the same one 3 times instead of three different ones.
  7. NUTHINGOESRITE

    GEN 1 Timing Chain install... HELP!!!

    OK Corona... got a few pics for you: So you have to have the "key" at 11:00. There are two links in the chains that are different colored. One lines up with the dot that is on the sprocket of the crank, the other one goes on the marked tooth of the cam sprocket. Not a bad process, but don't...
  8. NUTHINGOESRITE

    GEN 1 Timing Chain install... HELP!!!

    Thanks Corona. I will hit them up first thing Monday. I'll try and get a few pics loaded before I start putting everything back together.
  9. NUTHINGOESRITE

    GEN 1 Timing Chain install... HELP!!!

    So, I need help installing my timing chains... I have replaced my Oil Pump Gears with the Upgraded Livernois in prep for my supercharger. I am at the point I need to get everything lined back up. I need to turn the Crank back to 11:00, Line up the dots on the gear that slides onto the Crankshaft...
  10. NUTHINGOESRITE

    Repair/maintenance Manual

    What is everyone using for manuals? Looking for something that has torque specs and any other info that will help when I install the supercharger. Just want something that I can look up if I want to take something apart. My biggest worry is swapping out the oil pump gears. Really don't want to...
  11. NUTHINGOESRITE

    Icon stage 4 help

    Been looking around the forum a while and thinking the Icon stage 4 might be what I want since my stock setup is due for replacement. A few questions tho from some of you with more experience or those of you who have installed this yourself. This will be going on a 2011 screw with 44k miles...
  12. NUTHINGOESRITE

    Morimoto XB LED Headlights Now Shipping!

    Mine came in about a week ago. They look great! Only install instructions I could find were for a 2015.... But my 2011 wasn't much different. One difference was where to plug in the harness for the DRL's. On the 15-17 models it says to use position 131, but on the Gen 1's, there is no position...
  13. NUTHINGOESRITE

    Headlight upgrade on 2012 Raptor

    Just put in my order. Can't wait!!
  14. NUTHINGOESRITE

    GEN 1 Whipple Kit Install :D

    I'm getting ready for this same install. I have my 700hp kit from JDM, kooks full exhaust with green cats and headers and also the oil pump gears. Did you guys find anything that wasn't included in your kits that I should pick up before I start my install? Plan to start on mine once we get...
  15. NUTHINGOESRITE

    GEN 1 Supercharger... Waiting, not winning

    I am pretty sure my remaining parts were just received at my work address. Unfortunately I am off work for a few days, but I will update this thread once I go through everything and make sure it's all there. Not sure if I will be doing the install myself or not tho. With winter on itselling way...
  16. NUTHINGOESRITE

    GEN 1 Supercharger... Waiting, not winning

    I have called twice a month... along with emails to a couple of different addresses several times. I did get a couple emails today with tracking info. With any luck, it will be my remaining parts. I sure hope it is anyways. Thus waiting game is wearing thin...
  17. NUTHINGOESRITE

    GEN 1 Supercharger... Waiting, not winning

    How long did others have to wait for their Supercharger Kits? I put my order in for a Gen 3, Stage 2 kit on April 10 and I am still waiting on parts. After reading so many posts on here raving about great JDM is and how happy they are with their products/services, I decided it would be best to...
  18. NUTHINGOESRITE

    MSRP considered a "Low Bid" by Galpin Ford

    Check out woodhouse ford. They have a few different locations around Omaha. Looks like they have several under MsRP...
  19. NUTHINGOESRITE

    Whipple VS JDM

    Good to hear. I ordered a gen 2 stage 3 kit thru JDM and it should be shipping any day now. Going to have a local shop do the install along with a kooks exhaust. Very hopeful that it will have close to the same "driveability " as it has now.
  20. NUTHINGOESRITE

    If you're interested in paint coatings I'll get you sorted

    Any recommendations for a shop in the Lincoln/Omaha NE area? I've been wanting to get this done but have been on the fence about it. I have a friend that works for the city roads dept. He said their winter Brine mix that they put on the roads up here is so corrosive, that they can't even let it...
  21. NUTHINGOESRITE

    Alpine X009-FD1

    I have one in my 2011 I can't get it to copy a link here, but if you search for my posts, it will come up. there are some good pics of how it turned out. I used the unIvereal kit. I really like the way it turned out. Take a look at my post and let me know if you have any questions about the...
  22. NUTHINGOESRITE

    GEN 1 A few Questions before I take the Plunge

    Thanks for your input guys. Another thing I forgot to ask the Supercharged gang, do I need to add the heat exchanger since I occasionally pull a pretty big camper? (Pretty big for a 1/2 ton.)
  23. NUTHINGOESRITE

    GEN 1 A few Questions before I take the Plunge

    So, I am ready to take the supercharger plunge. I have a 2011 SCREW with 30K miles. Not a whole lot of off-roading, but I take every chance I can. (Living in Nebraska with such a capable truck and limited places to go really sucks.) My Plans: 1. Air Raid CAI 2. Kooks Full Exhaust...
  24. NUTHINGOESRITE

    GEN 2 Truck Order Discussion

    Just saw a semi going eastbound along I-80 in Nebraska with a couple of new Raptors on it. The one I noticed was Gunmetal Gray and looked pretty rad. I was going in the opposite direction, or I would've got a pic. I haven't even looked into trading mine out, but after seeing that one, it has me...
  25. NUTHINGOESRITE

    Help with Offset on Fuel Beast

    Thanks for your help guys. still on the fence with the 37's. I'm going to have to find some pictures of a setup with the same size wheel as the one with a 5.75" BS. I just don't want the wheels to be tucked in any more than they already are. So, that being said, can anybody tell me, will the...
Top