Hello Gen1 guys,
At the moment I have installed 3.0 Fox shocks on the rear and Deaver +3, and Fox 3.0 on the front.
Now the Deaver +3 are to stiff and I wanna go back to stock leafs or ICON leafs. But when go back to stock, the truck need to be leveled in the rear. What can I do? Install a...
Ok so I have to explain it better and I used the wrong word.
The problem I have is axle wrap. My setup is Fox 3.0 front and rear and rear Deaver +3
Deaver +3 is to hard, I will go back to stock leafs. Or maybe Icon Leafs, from what I heard, they are softer.
So what you guys wrote is, that Sway...
Hi Gen1,
can you tell me what is the difference between these two parts?
I sometimes have problem when towing a trailer that it feel like the rear axle is moving.
So now I don‘t know which of these parts are helping to stop that.
Thank you
Hi all, can you maybe tell me where to get exterior CAD Data from Raptor like the one I add here as picture?
I will design my own bumper, so it helps a lot to have a Data from Raptor front and rear with no bumper.
On www I only can find one which does not include the frame and the front/rear...
Okay I try to find Information but didn`t find anythink. Does real 37 s fit with Fox 3.0 on the front? If I jump or offroad hard, is pinch weld needed? Or does it fit with no needed pinch weld?
Do I need any updates on the rear? Fox 3.0 and stock leaf springs?
Thank you
Daniel
Is that also able with the Ford
Kit # 0910F150XLKIT3A+S
which adds a extra leaf?
Does any of you know if that makes the same smooth ride quality like Jeff‘s setup did?
Hi all,
can not find a Info about it, but is the SVC Bump Stop for Gen1 Raptor welded to the frame or do I need to drill a hole into the frame to install this BumpStop?
thanks
Daniel
Hi Gen1 owner. At the moment I need some new rotor and pads on the rear.
Now I was thinking to upgrade to rear Brembo 2 piece rotor or R1Concept 2 piece rotor, but with the stock caliper.
Only found some infos about one piece rotor.
Is that possible?
Thanks
Daniel
Sent from my iPad using...
Hi all,
I have a hyperflash problem on the left side of the truck. If it is cold outside it works one time, than also hyperflash. So now I think it is a hardware problem.
Do you know where to get a complete wiring diagramm for the Raptor? Its a 2013-2014 SuperCrew.
Thanks
Daniel
Have the same problem about hyperflash. But only on th left side of the truck.
Rear has LED flash lights. If it is cold/wer outside, it somerimes work.
If I take out the right rear LED, no hyperflash. Right side all the time works well.
Only the left side make me craty. When the car was...
I`m so confused about all these settings, turns and clicks.......
I still look for a soft ride feeling on road. At the moment my setting is
Both Compression tube full open to allow fluid to flow.
Rebound is from fully open 4 clicks or 1 turn to closed.
It sometimes feels good. But the...
Ok so maybe one of you can answere my question about pressure.
What is the highest pressure I can put into the Shocks and do they get more comfortable if I put more than 200psi in it?
RPG say 150 for street, but I always feels stiff on washboard roads.
Thank you
Daniel
Hi all, have a question about an Ironbull Bumper for the rear of the Truck.
Do the Trailer Hitch Receiver support the frame of the truck or is it only to handle a trailer?
Do a Ironbull Bumper have the same function of support as the OEM version?
Thanks
Daniel
Is it possible to set more PSI into the shocks, so that they are more comfortable?
I have RPG one too. Rebound is fully open. Don't know how to set the compression tubes for the most comfort ride onroad?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.