Search results

So I did this the other day, like the op said the hardest are the lower front most ones. The driver side was pretty easy. But the passanger side is right up against the shock tower. You can't see it at all from any normal spots. What worked for me was to turn the wheel right, and bassicly...

Yup tsb on this should be a recall. Everyone needs to report this to the ntsb. Same thing happened to me. I got the kit from Ford and fixed it my self since the dealer want like 200. The directions that come with the kit are are written like shit. Make sure you cut the right wire.

I'm getting ready to tacal the plugs on my 13 next weekend . I'm also going to change out the wires. I have been looking at getting the granatelli motorsports wires. I was just wondering if there are any other similar options out there?

Are plug wires only required for the ignition plugs, and NOT the exhaust plugs? Seems like everthing I see about the plug wires is for the ignition? Also thinking about getting ngk idridum's, anybody have any thoughts on that? ---------- Post added at 03:50 PM ---------- Previous post...

There is a YouTube video on a regular f150 guy doing the same thing. Helped a lot after reading directions, and thinking I cut the wrong line.

It was the fuse, got relocation kit, from a dealer. The directions that come with it are shit. Shows your soldering two wires togeather that are the same color, and aberrations that only a Ford tech might understand.

Just a little history 2 weeks ago I lost my trailer lights. Traced that down to the. 5 pin on trailer not making contact and was slightly melted. The other day cruising at about 90 the track felt like it just missed a beat. Later on it lost power wrench came on the screen then went way...

Thanks for all the replies, I know most people on here aren't going to put something or recommend something that would not perform as good or better then stock. I will have to talk to the body shop and see what they can do. pretty sure the honey badger is out of the budget, I like it for the...

Are the bumpers integrated with the tow hitch, or are the separate pieces? I guess everything depends on the hit. I Really want one addictive desert designs, bumpers but I don't know if it's in the budget. Was looking at the honey badger or dimple r Got to figure this out soon so body...

So I got rear ended the other day. Got hit so hard that my equalizer hitch got bent. Very little body damage but. But the frame is bent just a little. The tow hitch is cracked. I'm looking for a nice aftermarket bumper but, the one I was looking at from addictive desert designs I'm being...

I have been getting some slow cranking after the track sits for 2+ days. I don't drive the truck every day. sometimes the truck can sit for 6 days. Truck is a 13, that was purchased in Feb of 13. Original battery. Currently don't have any additional electronics installed like lights and...

thanks for the info I'm defiantly going to look into those

Good to know thanks for the feed back. I'm back to square one I guess went down to Discount tire today and found out that the ATP's in our size will not be available may or April. Their are not a lot of tires in stock size available for our trucks. Would I have better luck with an 18 inch...

Just under 46k on my truck while there is still a little bit of life in the original BFG's they are failing, one has a patch and I'm airing up every 3 weeks or so. This is a bit of dry rot in between the tread. Been looking at the Coopers Tire Details - Discount Tire I do all types of...

I have been looking for tires also, I have been looking at the nitto terra grappler 2s, I had a set a long time ago on my 4x Ranger, and was really pleased with them.

For hand wash clay bar and wax,

They did a pretty good job truck looks good, but I really need it to be clay bared. And keep going back and forth of doing it my self, or paying to have it done at around 200$.

I have to explain not to go through the track system. They tell me that others have gone threw with np. I tell them my owners manual says not to. Then I pay extra for hand was which is ok. Mine is a 13. I have read on here that somebody went here one and it broke the car wash.

Trailer is a 2001 tnt ignitor 7x18 v nose, it's also tall a 7 feet. 3500 pound axles. Really surprised that with the way the trailer was built that it doesn't have the heavy duty axles. I don't think I was over weight but pretty sure I was close to trailer max. she was pretty full, with all...

I kept an eye on everything, and everything stayed in normal range. However the temperature outside was no higher then 80 degrees. I also kept the speed at about 65 mph.

That was an RV, of course they pulled up after I got there. This was the section of the highway where they don't have rest stops just these pulls offs with no services. The pictures don't really show the size and height of my trailer. The trailer is a 2001 and I picked up for 2800, but it...

I noticed that when the batteries in the fob where going I had a hard time getting remote start to work and sometimes it would just honk at me also. Mine is a 13 and have replaced key fob batteries once so far.

Back in the beginning of November, I put the raptor to test. I moved from Va to Ca. Towing my new to me 7x18x 7 foot tall enclosed trailer. While I did not weigh the trailer I'm sure I was close to its 7gvw. Set up with a 10k equalizer weight distributing hitch. I traveled south to see a...

I built my own out of mdf, then wrapped it with some black leather like fabric, it was supposed to be temporary but it's held up I haven't had the need to get something different I think I spent about $30

Some how at about 33k I have a warped rotor. Vibrations mostly noticeable at higher speeds under hard braking. I see there are a few companies that have some upgrades, but trying to filter threw them and find reliable info on there effectiveness. I'm looking for an upgrade, Stock size...