My trans temp gets to operating temp rather quickly probably just as fast as the coolant. The 6r80 uses a thermostat that stop flow to the cooler...
If your engine and trans are in good shape I wouldn’t hesitate to get a good tune. Tunes don’t add a lot of hp so won’t really put more stress on...
That looks like tar. Look at the bolt itself has a line that runs same as the "crack"
these are the part numbers:
Bulb holders: DL3Z13N019A
Screws for bulbs: W715680-S437
Ballast screws: W715133-S900
Bulb/ballast wire: DL3Z-13A006-D
You would need (2) oem bulb holders and one wire from the bulb to ballast and misc screws for ballast and bulb holder. Which is all available on...
Spare ballast, harness, and bulbs
A few more pics
I have one available. It’s not in perfect shape. I can send you pics as soon as I get back home in a couple days.
Yes you do want hub centric spacers if you are going to run them.
Bora wheels spacers is the only thing I would consider.
I adjusted mine with channel locks. It’s been a while but I think you just gotta remove the skid plate. The nut itself isn’t very tight.
There is a nut on the steering rack to adjust backlash I believe. If you over tighten it the steering will get hard to turn. Wonder if it’s been...
I would get a different tune for sure. Do you have the stage 1 or HO system?
Make sure the coils are not hitting the shock look for wear marks or scratches. I know on gen 1 if you do not place the 2 wedges on the upper...
I have a set of OEM 13-14 HID headlights. Was going to use them on my 2010 but noticed they were painted blue instead of the original dark grey....
You said you wanted reliability so my vote goes for the gen 1.
Some email tuning is not "best guess tuning" there’s a few companies that specialize on certain vehicles that have tuned multiple vehicles with...
Look into traction bars or KHC torque arm. Definitely need one or the other to put the power down. This will extend your driveshaft life for sure....
F-350 tows as much as a semi?
Yeah just like all the long wheelbase trophy trucks racing around.
My gen 1 throw the code sometimes too. I guess it has to do with the truck detecting higher engine torque from the mods. Wrench will come on but...
Haven’t received mine either. Did you guys purchase them from BD or a BD dealer?
That’s usually what they run. Bought a set from 4wheel parts for same price. Tax is what you would save.
Don’t think he mentioned Raptor just a 2015!F-150.
After looking at both I’m leaning over to the Roush kit. You can get the kit from JDM with their tuner and not have to send your pcm. Their tune...
Separate names with a comma.