Magellan TRX7 on Ram can and swivel mount.
If you have the code from the sticker on the module try entering into the keypad then within 5 seconds press and release 1-2 then within 5...
Try looking on the BCM module. Passenger side kick panel where the fuses are. Should be a sticker with the code.
Bank 2 is the drivers side. VCT solenoid information here: https://www.fordraptorforum.com/threads/changing-vct-solenoid.47564/#post-977888
P0023 and P0024[ATTACH]
[ATTACH] It may not be the sensor. Could have something to do with the tune.
I agree. Sirius has an aviation subscription that has to be better. They are just being cheap with their product.
Release tension with breaker bar and remove belt from alternator pulley. Go to 6:28 in the video. [MEDIA]
Yes you are correct. The black wire from the kit goes to the BU/Rd wire you cut. [MEDIA]
Shows how to make the connection.
Take a look at the Magellan TRX7 CS. You can create custom routes via the website. Export and import .gpx files. Add way points , notes and...
Note the first paragraph instructions. From the 2014 service manual. Center bolt: 115 Nm / 85 ft lbs. Nuts: 70 Nm / 52 ft lbs.
Screenshots from the 2014 service manual.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
In case you are looking for the other end of harness. Screenshots from the 2014 service manual.
1-7 years old exempt
8-11 years old OBD plug in test
12 years old to my 1982 IM 240 dyno test
I think most mechanics use something like this: https://www.amazon.com/dp/B0002SRH5G/?tag=fordraptorforum-20
The shop manual lists a procedure...
From the Ford shop manual:
[ATTACH] [ATTACH] [ATTACH]
I think the shop manual would specify to use new bolts if required. It must be either the Napa thermostat or you are getting the o ring misaligned...
Here is the factory manual procedure. Very little torque required. You may be right about the new thermostat and the new o ring is out of...
I hope that they were from our favorite bands. SVT ,FRF or Ford Racing.
Try a nut splinter. Local auto parts store may offer free loaner. [MEDIA]
It may be a little harder to do because of the flange nut and you will...
This is cut from the service manual :
B33 SHIFT THE TRANSFER CASE TO 4L MANUALLY
Rotate the shift cam by hand to the 4L position.
This is cut from the 2014 service manual. I think you may be using the reset procedure when you need to be using the training procedure.
This is cut from the 2014 raptor supplement.
Note: If the vehicle is towed by other means
or incorrectly, vehicle damage may occur.
It looks like you remove the wire from the old connector and insert it into the one on the new shift motor. Screen shots from the 2014 manual:...
Separate names with a comma.